主頁 電源管理 柵極驅動器 隔離式柵極驅動器
新

UCC218915-Q1

預發布

具有分離輸出、DESAT 及故障報告功能的汽車級±2.8A 單通道隔離式前置驅動器

產品詳情

Isolation rating Reinforced Withstand isolation voltage (VISO) (Vrms) 5000 Working isolation voltage (VIOWM) (Vrms) 1063 Transient isolation voltage (VIOTM) (VPK) 7071 Peak output current (source) (typ) (A) 2.8 Features Active Short Circuit (ASC) protection, Active miller clamp, Desaturation (DESAT) protection, Fault reporting, Overcurrent protection, Overtemperature protection, Pre-driver, Soft turn-off, Undervoltage Lock Out (UVLO), Voltage monitoring Operating temperature range (°C) -40 to 125 Rating Automotive TI functional safety category Functional Safety-Capable
Isolation rating Reinforced Withstand isolation voltage (VISO) (Vrms) 5000 Working isolation voltage (VIOWM) (Vrms) 1063 Transient isolation voltage (VIOTM) (VPK) 7071 Peak output current (source) (typ) (A) 2.8 Features Active Short Circuit (ASC) protection, Active miller clamp, Desaturation (DESAT) protection, Fault reporting, Overcurrent protection, Overtemperature protection, Pre-driver, Soft turn-off, Undervoltage Lock Out (UVLO), Voltage monitoring Operating temperature range (°C) -40 to 125 Rating Automotive TI functional safety category Functional Safety-Capable
SSOP (DFP) 28 78.795 mm2 7.65 x 10.3
  • 5kVRMS single-channel isolated pre-driver
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: -40°C to +125°C ambient operating temperature range
  • SiC MOSFETs and IGBTs up to 1500Vpk
  • 36V maximum output drive voltage (VDD-VEE)
  • 2.8A outputs for directly driving external buffer PMOS/NMOS pair.
  • 200V/ns minimum CMTI
  • 200ns response time fast DESAT protection with 9V threshold
  • External active Miller clamp
  • Dedicated Soft Shut Down (SSD) pin with 1A sinking capability. Shut down current is controllable by an external resistor.
  • ASC input on isolated side to turn on power switch during system fault. ASC status reported through ASC_FB on low-voltage side.
  • Overcurrent reporting on FLT and reset from RST/EN
  • Fast enable/disable response on RST/EN
  • 12V VDD UVLO with power good on RDY
  • Overtemperature protection with power good on RDY
  • 100ns (maximum) propagation delay
  • 28-DFP wide body package with creepage and clearance distance > 8mm
  • Operating junction temperature –40°C to 150°C
  • 5kVRMS single-channel isolated pre-driver
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: -40°C to +125°C ambient operating temperature range
  • SiC MOSFETs and IGBTs up to 1500Vpk
  • 36V maximum output drive voltage (VDD-VEE)
  • 2.8A outputs for directly driving external buffer PMOS/NMOS pair.
  • 200V/ns minimum CMTI
  • 200ns response time fast DESAT protection with 9V threshold
  • External active Miller clamp
  • Dedicated Soft Shut Down (SSD) pin with 1A sinking capability. Shut down current is controllable by an external resistor.
  • ASC input on isolated side to turn on power switch during system fault. ASC status reported through ASC_FB on low-voltage side.
  • Overcurrent reporting on FLT and reset from RST/EN
  • Fast enable/disable response on RST/EN
  • 12V VDD UVLO with power good on RDY
  • Overtemperature protection with power good on RDY
  • 100ns (maximum) propagation delay
  • 28-DFP wide body package with creepage and clearance distance > 8mm
  • Operating junction temperature –40°C to 150°C

The UCC218915-Q1 is a galvanically isolated single channel pre-driver designed for SiC MOSFETs and IGBTs up to 1500V DC operating voltage with advanced protection features, best-in-class dynamic performance, and robustness. The UCC218915-Q1 has dual 2.8A outputs for directly driving an external buffer NMOS/PMOS pair.

The input side is isolated from the output side with SiO2 isolation technology, supporting up to 1.06kVRMS working voltage, 10kVPK surge immunity with longer than 40-years isolation barrier life, as well as providing low part-to-part skew, and >200V/ns common mode noise immunity (CMTI).

The UCC218915-Q1 includes state-of-art protection features, such as fast overcurrent and short circuit detection, controlled soft shutdown after a fault, fault reporting, active Miller clamp, active short circuit input on the high-voltage side and input and output side power supply UVLO to optimize SiC and IGBT switching behavior and robustness.

The UCC218915-Q1 is a galvanically isolated single channel pre-driver designed for SiC MOSFETs and IGBTs up to 1500V DC operating voltage with advanced protection features, best-in-class dynamic performance, and robustness. The UCC218915-Q1 has dual 2.8A outputs for directly driving an external buffer NMOS/PMOS pair.

The input side is isolated from the output side with SiO2 isolation technology, supporting up to 1.06kVRMS working voltage, 10kVPK surge immunity with longer than 40-years isolation barrier life, as well as providing low part-to-part skew, and >200V/ns common mode noise immunity (CMTI).

The UCC218915-Q1 includes state-of-art protection features, such as fast overcurrent and short circuit detection, controlled soft shutdown after a fault, fault reporting, active Miller clamp, active short circuit input on the high-voltage side and input and output side power supply UVLO to optimize SiC and IGBT switching behavior and robustness.
下載 觀看帶字幕的視頻 視頻

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 1
類型 標題 下載最新的英語版本 日期
* 數據表 UCC218915-Q1 Single Channel Isolated Pre-Driver for SiC/IGBT with Active Protection for Automotive Applications 數據表 PDF | HTML 2025年 9月 16日

設計和開發

如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。

評估板

UCC2189X5YQEVM-096 — UCC2189X5Y 評估模塊

UCC2189X5YQEVM-096 是一款緊湊型半橋柵極驅動器板，包含兩個單通道隔離式柵極驅動器。它可提供所需的隔離式輔助電源、驅動電流和保護功能，用于驅動多個不同型號的 Wolfspeed 碳化硅 (SiC) MOSFET 模塊和其他具有類似引腳排列的 IGBT 或 SiC MOSFET 模塊。
用戶指南: PDF | HTML
英語版: PDF | HTML
TI.com 上無現貨
模擬工具

PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具

PSpice? for TI 可提供幫助評估模擬電路功能的設計和仿真環境。此功能齊全的設計和仿真套件使用 Cadence? 的模擬分析引擎。PSpice for TI 可免費使用，包括業內超大的模型庫之一，涵蓋我們的模擬和電源產品系列以及精選的模擬行為模型。

借助?PSpice for TI 的設計和仿真環境及其內置的模型庫，您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案，然后再進行布局和制造，可縮短產品上市時間并降低開發成本。?

在?PSpice for TI 設計和仿真工具中，您可以搜索 TI (...)
發送申請
封裝 引腳 CAD 符號、封裝和 3D 模型
SSOP (DFP) 28 Ultra Librarian

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

視頻