主頁 電源管理 AC/DC 和 DC/DC 轉換器（集成 FET）

TPS60402-Q1

正在供貨

具有 50kHz 固定頻率的汽車類非穩壓 60mA 電荷泵電壓逆變器

產品詳情

Rating Automotive Iout (max) (A) 0.06 Vin (max) (V) 5.25 Vin (min) (V) 1.6 Vout (max) (V) -1.6 Vout (min) (V) -5.25 Features Adjustable current limit, Unregulated Switching frequency (min) (kHz) 25 Switching frequency (max) (kHz) 75 Operating temperature range (°C) -40 to 125 Iq (typ) (μA) 120 Type Charge pump, Converter (Integrated Switch), DC/DC converter
Rating Automotive Iout (max) (A) 0.06 Vin (max) (V) 5.25 Vin (min) (V) 1.6 Vout (max) (V) -1.6 Vout (min) (V) -5.25 Features Adjustable current limit, Unregulated Switching frequency (min) (kHz) 25 Switching frequency (max) (kHz) 75 Operating temperature range (°C) -40 to 125 Iq (typ) (μA) 120 Type Charge pump, Converter (Integrated Switch), DC/DC converter
SOT-23 (DBV) 5 8.12 mm2 2.9 x 2.8
  • Qualified for Automotive Applications
  • AEC-Q100 Test Guidance With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C6
  • Inverts Input Supply Voltage
  • Up to 60-mA Output Current
  • Only Three Small 1-μF Ceramic Capacitors Needed
  • Input Voltage Range From 1.8 V to 5.25 V
  • PowerSave-Mode for Improved Efficiency at Low Output Currents (TPS60400-Q1)
  • Device Quiescent Current Typical: 100 μA
  • Integrated Active Schottky-Diode for Start-Up Into Load
  • Small 5-Pin SOT23 Package
  • Evaluation Module Available: TPS60400EVM-178
  • Qualified for Automotive Applications
  • AEC-Q100 Test Guidance With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C6
  • Inverts Input Supply Voltage
  • Up to 60-mA Output Current
  • Only Three Small 1-μF Ceramic Capacitors Needed
  • Input Voltage Range From 1.8 V to 5.25 V
  • PowerSave-Mode for Improved Efficiency at Low Output Currents (TPS60400-Q1)
  • Device Quiescent Current Typical: 100 μA
  • Integrated Active Schottky-Diode for Start-Up Into Load
  • Small 5-Pin SOT23 Package
  • Evaluation Module Available: TPS60400EVM-178

The TPS6040x-Q1 family of devices generate an unregulated negative output voltage from an input voltage ranging from 1.8 V to 5.25 V. The devices are typically supplied by a preregulated supply rail of 5 V or 3.3 V. Due to its wide-input voltage range, two or three NiCd, NiMH, or alkaline battery cells, as well as one Li-Ion cell, can also power them.

Only three external 1-µF capacitors are required to build a complete DC-DC charge pump inverter. Assembled in a 5-pin SOT-23 package, the complete converter can be built on a 50-mm2 board area. Replacing the Schottky diode typically needed for start-up into load with integrated circuitry can achieve additional board area and component count reduction.

The TPS6040x-Q1 can deliver a maximum output current of 60 mA, with a typical conversion efficiency of greater than 90% over a wide output current range. Three device options TPS60401/2/3-Q1 with 20-kHz, 50-kHz, and 250-kHz fixed frequency operation are available. TPS60400-Q1 device comes with a variable switching frequency to reduce operating current in applications with a wide load range and enables the design with low-value capacitors.

The TPS6040x-Q1 family of devices generate an unregulated negative output voltage from an input voltage ranging from 1.8 V to 5.25 V. The devices are typically supplied by a preregulated supply rail of 5 V or 3.3 V. Due to its wide-input voltage range, two or three NiCd, NiMH, or alkaline battery cells, as well as one Li-Ion cell, can also power them.

Only three external 1-µF capacitors are required to build a complete DC-DC charge pump inverter. Assembled in a 5-pin SOT-23 package, the complete converter can be built on a 50-mm2 board area. Replacing the Schottky diode typically needed for start-up into load with integrated circuitry can achieve additional board area and component count reduction.

The TPS6040x-Q1 can deliver a maximum output current of 60 mA, with a typical conversion efficiency of greater than 90% over a wide output current range. Three device options TPS60401/2/3-Q1 with 20-kHz, 50-kHz, and 250-kHz fixed frequency operation are available. TPS60400-Q1 device comes with a variable switching frequency to reduce operating current in applications with a wide load range and enables the design with low-value capacitors.
下載 觀看帶字幕的視頻 視頻

您可能感興趣的相似產品

功能與比較器件相似
TPS60400-Q1 正在供貨 汽車類非穩壓 60mA 電荷泵電壓逆變器 Power save mode for improved efficiency

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 4
類型 標題 下載最新的英語版本 日期
* 數據表 TPS6040x-Q1 Unregulated 60-mA Charge Pump Voltage Inverter 數據表 (Rev. B) PDF | HTML 2016年 10月 17日
功能安全信息 TPS6040x-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2021年 2月 16日
應用手冊 Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018年 12月 11日
應用手冊 Extending the Soft Start Time Without a Soft Start Pin (Rev. B) 2017年 6月 15日

設計和開發

如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。

評估板

TPS60400EVM-178 — 用于電荷泵逆變器（裸 PCB）的評估模塊

Need for use: The EVM does not contain any components. The pcb therefore first has to be populated with the appropriate components. A description of different applications that can be tested using the EVM can be found in the TPS60400EVM users guide. Samples of the TPS6040x family can be (...)

用戶指南: PDF
TI.com 上無現貨
封裝 引腳 CAD 符號、封裝和 3D 模型
SOT-23 (DBV) 5 Ultra Librarian

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

視頻