主頁 電源管理 監控器和復位 IC 復位及看門狗 IC

TPS386000-Q1

正在供貨

具有可編程延遲和看門狗計時器的汽車級四通道電源電壓監控器

產品詳情

Rating Automotive Number of supplies monitored 3, 4 Threshold voltage 1 (typ) (V) 0.4, Adjustable Features Manual reset capable, Negative voltage monitoring, Timeout watchdog, Undervoltage and overvoltage monitor, Watchdog timer Reset threshold accuracy (%) 0.5, 1 Iq (typ) (mA) 0.011, 0.012 Output driver type/reset output Active-low, Open-drain Time delay (ms) 20, 30, 300 Watchdog timer WDI (s) 0.6 Supply voltage (min) (V) 1.8 Supply voltage (max) (V) 6.5 Operating temperature range (°C) -40 to 125
Rating Automotive Number of supplies monitored 3, 4 Threshold voltage 1 (typ) (V) 0.4, Adjustable Features Manual reset capable, Negative voltage monitoring, Timeout watchdog, Undervoltage and overvoltage monitor, Watchdog timer Reset threshold accuracy (%) 0.5, 1 Iq (typ) (mA) 0.011, 0.012 Output driver type/reset output Active-low, Open-drain Time delay (ms) 20, 30, 300 Watchdog timer WDI (s) 0.6 Supply voltage (min) (V) 1.8 Supply voltage (max) (V) 6.5 Operating temperature range (°C) -40 to 125
VQFN (RGP) 20 16 mm2 4 x 4
  • Qualified for Automotive Applications
  • AEC Q100 Test Guidance With the Following
    Results:
    • Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature Range
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C4B
  • Four Complete SVS Modules on one Silicon
    Platform
  • Programmable Delay Time: 1.4 ms to 10 s
  • Very Low Quiescent Current: 12 μA Typical
  • Threshold Accuracy: 0.25% Typical
  • SVS-1: Manual Reset (MR) Input
  • SVS-1, 2, 3: Adjustable Threshold Down to 0.4 V
  • SVS-4:
    • Adjustable Threshold at Any Positive or
      Negative Voltage with VREF (1.2 V)
    • Window Comparator
  • Watchdog Timer with Dedicated Output
  • Well-Controlled RESETn Output During Power-Up
  • Open-Drain RESETn and WDO
  • Package: 4-mm × 4-mm, 20-pin VQFN
  • Qualified for Automotive Applications
  • AEC Q100 Test Guidance With the Following
    Results:
    • Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature Range
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C4B
  • Four Complete SVS Modules on one Silicon
    Platform
  • Programmable Delay Time: 1.4 ms to 10 s
  • Very Low Quiescent Current: 12 μA Typical
  • Threshold Accuracy: 0.25% Typical
  • SVS-1: Manual Reset (MR) Input
  • SVS-1, 2, 3: Adjustable Threshold Down to 0.4 V
  • SVS-4:
    • Adjustable Threshold at Any Positive or
      Negative Voltage with VREF (1.2 V)
    • Window Comparator
  • Watchdog Timer with Dedicated Output
  • Well-Controlled RESETn Output During Power-Up
  • Open-Drain RESETn and WDO
  • Package: 4-mm × 4-mm, 20-pin VQFN

The TPS386000-Q1 family of voltage supervisors can monitor four power rails that are greater than 0.4 V and one power rail less than 0.4 V (including negative voltage) with a 0.25% (typical) threshold accuracy. Each of the four supervisory circuits (SVS-n) assert a RESETn or RESETn output signal when the SENSEm input voltage drops below the programmed threshold. With external resistors, the threshold of each SVS-n can be programmed (where n = 1, 2, 3, 4 and m = 1, 2, 3, 4L, 4H).

Each SVS-n has a programmable delay before releasing RESETn or RESETn. The delay time can be set from 1.4 ms to 10 s through the CTn pin connection. Only SVS-1 has an active-low manual reset (MR) input; a logic-low input to MR asserts RESET1 or RESET1.

SVS-4 monitors the threshold window using two comparators. The extra comparator can be configured as a fifth SVS to monitor negative voltage with voltage reference output VREF.

The TPS386000-Q1 device has a very low quiescent current of 12 µA (typical) and is available in a small, 4-mm × 4-mm, VQFN-20 package.

The TPS386000-Q1 family of voltage supervisors can monitor four power rails that are greater than 0.4 V and one power rail less than 0.4 V (including negative voltage) with a 0.25% (typical) threshold accuracy. Each of the four supervisory circuits (SVS-n) assert a RESETn or RESETn output signal when the SENSEm input voltage drops below the programmed threshold. With external resistors, the threshold of each SVS-n can be programmed (where n = 1, 2, 3, 4 and m = 1, 2, 3, 4L, 4H).

Each SVS-n has a programmable delay before releasing RESETn or RESETn. The delay time can be set from 1.4 ms to 10 s through the CTn pin connection. Only SVS-1 has an active-low manual reset (MR) input; a logic-low input to MR asserts RESET1 or RESET1.

SVS-4 monitors the threshold window using two comparators. The extra comparator can be configured as a fifth SVS to monitor negative voltage with voltage reference output VREF.

The TPS386000-Q1 device has a very low quiescent current of 12 µA (typical) and is available in a small, 4-mm × 4-mm, VQFN-20 package.
下載 觀看帶字幕的視頻 視頻

查看 TI.com 庫存以尋找類似產品

具有類似規格的產品，按可用的 TI.com 庫存分類。

立即查看

您可能感興趣的相似產品

open-in-new 比較替代產品
功能與比較器件相似
TPS3704-Q1 正在供貨 高精度緊湊型汽車多通道窗口監控器 Offers fixed threshold voltages from 0.4 V to 5.5 V with more granular threshold settings and higher accuracy with a wide range of reset time delays.
TPS389006-Q1 正在供貨 汽車類多通道過壓和欠壓 I2C 可編程電壓監控器和監測器 Consider TPS389006-Q1 for designs requiring up to six voltage supervisor channels.

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 4
類型 標題 下載最新的英語版本 日期
* 數據表 TPS386000-Q1 Quad Supply Voltage Supervisors With Programmable Delay and Watchdog Timer 數據表 (Rev. B) PDF | HTML 2015年 12月 11日
應用手冊 設計電壓監控器的電阻分壓器輸入端時的 IQ與精度權衡因素 (Rev. B) PDF | HTML 英語版 (Rev.B) PDF | HTML 2021年 10月 25日
選擇指南 Automotive Supervisor and Reset IC Selection Guide 2016年 2月 22日
應用手冊 TPS386000-Q1 Pin FMEA 2013年 12月 5日

設計和開發

如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。

評估板

TPS386000EVM-736 — TPS386000 四路電源電壓監控器評估模塊

TPS386000EVM-736 是一塊完全組裝且經過測試的電路板，用于評估 20 引腳 QFN 封裝的 TPS386000 四路電源電壓監控器。TPS386000EVM-736 可以進行定制，更改電阻值可監控高于 0.4V 的電壓，包括使用 SENSE4H 和 SENSE4L 輸入進行窗口監控和正負監控。TPS386000EVM-736 還可評估芯片的內部看門狗定時器、手動復位和時間延遲功能。
用戶指南: PDF
TI.com 上無現貨
模擬工具

PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具

PSpice? for TI 可提供幫助評估模擬電路功能的設計和仿真環境。此功能齊全的設計和仿真套件使用 Cadence? 的模擬分析引擎。PSpice for TI 可免費使用，包括業內超大的模型庫之一，涵蓋我們的模擬和電源產品系列以及精選的模擬行為模型。

借助?PSpice for TI 的設計和仿真環境及其內置的模型庫，您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案，然后再進行布局和制造，可縮短產品上市時間并降低開發成本。?

在?PSpice for TI 設計和仿真工具中，您可以搜索 TI (...)
發送申請
封裝 引腳 CAD 符號、封裝和 3D 模型
VQFN (RGP) 20 Ultra Librarian

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

支持和培訓

視頻