主頁 電源管理 線性和低壓降 (LDO) 穩壓器

LP3982

正在供貨

具有電源正常指示和使能功能的 300mA、高精度、低壓降穩壓器

產品詳情

Rating Catalog Vin (max) (V) 6 Vin (min) (V) 2.5 Iout (max) (A) 0.3 Output options Adjustable Output, Fixed Output Vout (max) (V) 3.3 Vout (min) (V) 1.8 Fixed output options (V) 1.8, 2.5, 2.82, 3, 3.3 Noise (μVrms) 37 PSRR at 100 KHz (dB) 20 Iq (typ) (mA) 0.09 Features Enable, Power good Thermal resistance θJA (°C/W) 53 Load capacitance (min) (μF) 2.2 Regulated outputs (#) 1 Accuracy (%) 2 Dropout voltage (Vdo) (typ) (mV) 120 Operating temperature range (°C) -40 to 85
Rating Catalog Vin (max) (V) 6 Vin (min) (V) 2.5 Iout (max) (A) 0.3 Output options Adjustable Output, Fixed Output Vout (max) (V) 3.3 Vout (min) (V) 1.8 Fixed output options (V) 1.8, 2.5, 2.82, 3, 3.3 Noise (μVrms) 37 PSRR at 100 KHz (dB) 20 Iq (typ) (mA) 0.09 Features Enable, Power good Thermal resistance θJA (°C/W) 53 Load capacitance (min) (μF) 2.2 Regulated outputs (#) 1 Accuracy (%) 2 Dropout voltage (Vdo) (typ) (mV) 120 Operating temperature range (°C) -40 to 85
VSSOP (DGK) 8 14.7 mm2 3 x 4.9 WSON (NGM) 8 7.5 mm2 2.5 x 3
  • 2.5-V to 6-V Input Range
  • MAX8860 Pin, Package, and Specification Compatible
  • 300-mA Output Current
  • 120-mV Typical Dropout at 300 mA
  • 90-μA Typical Quiescent Current
  • 1-nA Typical Shutdown Mode
  • 60-dB Typical PSRR
  • 120-μs Typical Turnon Time
  • Stable With Small Ceramic Output Capacitors
  • 37-μVRMS Output Voltage Noise
    (10 Hz to 100 kHz)
  • Overtemperature/Overcurrent Protection
  • ±2% Output Voltage Tolerance
  • Create a Custom Design Using the LP3982 With the WEBENCH? Power Designer
  • 2.5-V to 6-V Input Range
  • MAX8860 Pin, Package, and Specification Compatible
  • 300-mA Output Current
  • 120-mV Typical Dropout at 300 mA
  • 90-μA Typical Quiescent Current
  • 1-nA Typical Shutdown Mode
  • 60-dB Typical PSRR
  • 120-μs Typical Turnon Time
  • Stable With Small Ceramic Output Capacitors
  • 37-μVRMS Output Voltage Noise
    (10 Hz to 100 kHz)
  • Overtemperature/Overcurrent Protection
  • ±2% Output Voltage Tolerance
  • Create a Custom Design Using the LP3982 With the WEBENCH? Power Designer

The LP3982 low-dropout (LDO) CMOS linear regulator is available in 1.8-V, 2.5-V, 2.82-V, 3-V,
3.3-V, and adjustable versions. They deliver 300 mA of output current. Packaged in an 8-pin VSSOP, the LP3982 is pin- and package-compatible with Maxim’s MAX8860. The LM3982 is also available in the small footprint WSON package.

The LP3982 suits battery-powered applications because of its shutdown mode (1 nA typical), low quiescent current (90 µA typical), and LDO voltage (120 mV typical). The low dropout voltage allows for more utilization of a battery’s available energy by operating closer to its end-of-life voltage. The LP3982 device’s PMOS output transistor consumes relatively no drive current compared to PNP LDO regulators.

This PMOS regulator is stable with small ceramic capacitive loads (2.2 µF typical).

These devices also include regulation fault detection, a bandgap voltage reference, constant current limiting, and thermal-overload protection.

The LP3982 low-dropout (LDO) CMOS linear regulator is available in 1.8-V, 2.5-V, 2.82-V, 3-V,
3.3-V, and adjustable versions. They deliver 300 mA of output current. Packaged in an 8-pin VSSOP, the LP3982 is pin- and package-compatible with Maxim’s MAX8860. The LM3982 is also available in the small footprint WSON package.

The LP3982 suits battery-powered applications because of its shutdown mode (1 nA typical), low quiescent current (90 µA typical), and LDO voltage (120 mV typical). The low dropout voltage allows for more utilization of a battery’s available energy by operating closer to its end-of-life voltage. The LP3982 device’s PMOS output transistor consumes relatively no drive current compared to PNP LDO regulators.

This PMOS regulator is stable with small ceramic capacitive loads (2.2 µF typical).

These devices also include regulation fault detection, a bandgap voltage reference, constant current limiting, and thermal-overload protection.
下載 觀看帶字幕的視頻 視頻

您可能感興趣的相似產品

功能與比較器件相同，但引腳排列有所不同
TPS745 正在供貨 具有電源正常指示功能的 500mA、低 IQ、高精度、可調節超低壓降穩壓器 500-mA LDO with Power-Good and enable in smaller package (2x2mm)
TPS7A20 正在供貨 具有高 PSRR 的 300mA、超低噪聲、低 IQ、低壓降 (LDO) 線性穩壓器 300-mA LDO with improved performance and smaller size for cost-sensitive solutions without Power-Good

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 2
類型 標題 下載最新的英語版本 日期
* 數據表 LP3982 Micropower, Ultra-Low-Dropout, Low-Noise, 300-mA CMOS Regulator 數據表 (Rev. F) PDF | HTML 2017年 4月 25日
技術文章 Integrated power devices simplify FPGA and SoC designs PDF | HTML 2017年 1月 11日

設計和開發

如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。

參考設計

TIDA-01172 — 適用于 MSP430 器件的帶單通道 LDO 的動態電壓縮放電源解決方案參考設計

本參考設計可節省功耗，適用于 MSP430 FRAM 器件或其他利用加電滯后功能的系統。TIDA-01172 采用可調節 LDO 和 RC 延時時間，從而由更高的啟動電壓轉換至最終低功耗運行電壓。
設計指南: PDF
原理圖: PDF
封裝 引腳 CAD 符號、封裝和 3D 模型
VSSOP (DGK) 8 Ultra Librarian
WSON (NGM) 8 Ultra Librarian

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

視頻