LM3670
- Input Voltage Range: 2.5 V to 5.5 V
- Adjustable Output Voltages (VOUT): 0.7 V to 2.5 V
- Fixed Output Voltages: 1.2 V, 1.5 V, 1.6 V, 1.8 V, 1.875 V, 3.3V
- 15-μA Typical Quiescent Current
- 350-mA Maximum Load Capability
- 1-MHz PWM Fixed Switching Frequency (Typical)
- Automatic PFM and PWM Mode Switching
- Low Dropout Operation – 100% Duty Cycle Mode
- Internal Synchronous Rectification for High Efficiency
- Internal Soft Start
- 0.1-μA Typical Shutdown Current
- Current Overload Protection
- Operates from a Single Li-Ion Cell or Three-Cell NiMH/NiCd Batteries
- Only Three Tiny Surface-Mount External Components Required (One Inductor, Two Ceramic Capacitors)
The LM3670 step-down DC-DC converter is optimized for powering ultralow voltage circuits from a single Li-Ion cell or three-cell NiMH/NiCd batteries. It provides up to 350-mA load current, over an input voltage range from 2.5 V to 5.5 V. There are several different fixed voltage output options available as well as an adjustable output voltage version.
The device offers superior features and performance for mobile phones and similar portable applications with complex power management systems. Automatic intelligent switching between pulse width modulation (PWM) low-noise and pulse frequency modulation (PFM) low-current mode offers improved system control. During full-power operation, a fixed-frequency 1-MHz (typical) PWM mode drives loads from approximately 70 mA to 350 mA maximum, with up to 95% efficiency. Hysteretic PFM mode extends the battery life through reduction of the quiescent current to 15 µA (typical) during light current loads and system standby. Internal synchronous rectification provides high efficiency (90% to 95% typical at loads between 1 mA and 100 mA). In shutdown mode (enable (EN) pin pulled low) the device turns off and reduces battery consumption to 0.1 µA (typical).
The LM3670 is available in a 5-pin SOT-23 package. A high switching frequency (1 MHz typical) allows use of tiny surface-mount components. Only three external surface-mount components, an inductor and two ceramic capacitors, are required.
For all available packages, see the orderable addendum at the end of the data sheet.您可能感興趣的相似產品
功能與比較器件相似
技術文檔
| 類型 | 標題 | 下載最新的英語版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 數據表 | LM3670 Miniature Step-Down DC-DC Converter for Ultralow Voltage Circuits 數據表 (Rev. F) | PDF | HTML | 2016年 2月 18日 | ||
| 應用手冊 | TI 降壓開關直流/直流轉換器應用手冊的快速參考指南 (Rev. B) | PDF | HTML | 英語版 (Rev.B) | PDF | HTML | 2022年 7月 8日 | |
| 選擇指南 | 電源管理指南 2018 (Rev. K) | 2018年 7月 31日 | ||||
| 選擇指南 | 電源管理指南 2018 (Rev. R) | 2018年 6月 25日 | ||||
| EVM 用戶指南 | AN-1348 LM3670 Evaluation Board (Rev. D) | 2013年 4月 30日 | ||||
| 應用手冊 | Application Note 1348 LM3670 Evaluation Board (cn) | 2008年 10月 9日 |
設計和開發
如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。
TMDSLCD1EVM — 1280x800 LCD 顯示附件套件
1280x800 LCD 顯示附件套件是一款用于 AM65x IDK (TMDX654IDKEVM) 的附加附件,可增加觸摸和顯示功能,適用于 HMI 和工業 PC 評估以及其他需要顯示器的用例。1280x800 LCD 顯示附件套件與 AM65x EVM (TMDX654GPEVM) 捆綁銷售,但也可以作為替換產品單獨購買。LCD 屏幕為 10.1" 顯示屏,具有 WXGA 分辨率 (1280x800) 并支持 10 點電容式觸摸。
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。