SLOS879C April   2014  – June 2025 DRV2625

PRODUCTION DATA  

1.   1
2. 1 Features
3. 2 Applications
4. 3 Description
5. 4 Pin Configuration and Functions
6. 5 Specifications
   1. 5.1 Absolute Maximum Ratings
   2. 5.2 ESD Ratings
   3. 5.3 Recommended Operating Conditions
   4. 5.4 Thermal Information
   5. 5.5 Electrical Characteristics
   6. 5.6 Timing Requirements
   7. 5.7 Switching Characteristics
   8. 5.8 Typical Characteristics
7. 6 Parameter Measurement Information
   1. 6.1 Test Setup for Graphs
      1. 6.1.1 Default Test Conditions
8. 7 Detailed Description
   1. 7.1 Overview
   2. 7.2 Functional Block Diagram
   3. 7.3 Feature Description
      1. 7.3.1  Support for ERM and LRA Actuators
      2. 7.3.2  Smart-Loop Architecture
         1. 7.3.2.1 Auto-Resonance Engine for LRA
         2. 7.3.2.2 Real-Time Resonance-Frequency Reporting for LRA
         3. 7.3.2.3 Automatic Switch to Open-Loop for LRA
         4. 7.3.2.4 Automatic Overdrive and Braking
            1. 7.3.2.4.1 Startup Boost
            2. 7.3.2.4.2 Brake Factor
         5. 7.3.2.5 Automatic Level Calibration
            1. 7.3.2.5.1 Automatic Compensation for Resistive Losses
            2. 7.3.2.5.2 Automatic Back-EMF Normalization
            3. 7.3.2.5.3 Calibration Time Adjustment
            4. 7.3.2.5.4 Loop-Gain Control
            5. 7.3.2.5.5 Back-EMF Gain Control
         6. 7.3.2.6 Actuator Diagnostics
         7. 7.3.2.7 Automatic Re-Synchronization
      3. 7.3.3  Open-Loop Operation
         1. 7.3.3.1 Waveform Shape Selection for LRA
         2. 7.3.3.2 Automatic Braking in Open Loop
      4. 7.3.4  Flexible Front-End Interface
         1. 7.3.4.1 Internal Memory Interface
            1. 7.3.4.1.1 Library Parameterization
            2. 7.3.4.1.2 Playback Interval
            3. 7.3.4.1.3 Waveform Sequencer
         2. 7.3.4.2 Real-Time Playback (RTP) Interface
         3. 7.3.4.3 Process Trigger
      5. 7.3.5  Noise Gate Control
      6. 7.3.6  Edge Rate Control
      7. 7.3.7  Constant Vibration Strength
      8. 7.3.8  Battery Voltage Reporting
      9. 7.3.9  Ultra Low-Power Shutdown
      10. 7.3.10 Automatic Go-To-Stand-by (Low Power)
      11. 7.3.11 I2C Watchdog Timer
      12. 7.3.12 Device Protection
          1. 7.3.12.1 Thermal Sensor
          2. 7.3.12.2 Over-Current Protection
          3. 7.3.12.3 VDD UVLO Protection
          4. 7.3.12.4 Brownout Protection
      13. 7.3.13 POR
      14. 7.3.14 Silicon Revision Control
      15. 7.3.15 Support for LRA and ERM Actuators
      16. 7.3.16 Multi-Purpose Pin Functionality
          1. 7.3.16.1 Trigger-Pulse Functionality
          2. 7.3.16.2 Trigger-Level (Enable) Functionality
          3. 7.3.16.3 Interrupt Functionality
      17. 7.3.17 Automatic Transition to Standby State
      18. 7.3.18 Automatic Brake into Standby
      19. 7.3.19 Battery Monitoring and Power Preservation
   4. 7.4 Device Functional Modes
      1. 7.4.1 Power States
      2. 7.4.2 Operation With VDD < 2.5 V (Minimum VDD)
      3. 7.4.3 Operation With VDD > 6 V (Absolute Maximum VDD)
      4. 7.4.4 Operation in Shutdown State
      5. 7.4.5 Operation in STANDBY State
      6. 7.4.6 Operation in ACTIVE State
      7. 7.4.7 Changing Modes of Operation
   5. 7.5 Operation During Exceptional Conditions
      1. 7.5.1 Operation With No Actuator Attached
      2. 7.5.2 Operation With a Non-Moving Actuator Attached
      3. 7.5.3 Operation With a Short at REG Pin
      4. 7.5.4 Operation With a Short at OUT+, OUT–, or Both
   6. 7.6 Programming
      1. 7.6.1  Auto-Resonance Engine Programming for the LRA
         1. 7.6.1.1 Drive-Time Programming
         2. 7.6.1.2 Current-Dissipation Time Programming
         3. 7.6.1.3 Blanking Time Programming
         4. 7.6.1.4 Zero-Crossing Detect-Time Programming
      2. 7.6.2  Automatic-Level Calibration Programming
         1. 7.6.2.1 Rated Voltage Programming
         2. 7.6.2.2 Overdrive Voltage-Clamp Programming
      3. 7.6.3  I2C Interface
         1. 7.6.3.1 TI Haptic Broadcast Mode
         2. 7.6.3.2 I2C Communication Availability
         3. 7.6.3.3 General I2C Operation
         4. 7.6.3.4 Single-Byte and Multiple-Byte Transfers
         5. 7.6.3.5 Single-Byte Write
         6. 7.6.3.6 Multiple-Byte Write and Incremental Multiple-Byte Write
         7. 7.6.3.7 Single-Byte Read
         8. 7.6.3.8 Multiple-Byte Read
      4. 7.6.4  Programming for Open-Loop Operation
         1. 7.6.4.1 Programming for ERM Open-Loop Operation
         2. 7.6.4.2 Programming for LRA Open-Loop Operation
      5. 7.6.5  Programming for Closed-Loop Operation
      6. 7.6.6  Diagnostics Routine
      7. 7.6.7  Calibration Routine
      8. 7.6.8  Waveform Playback Programming
         1. 7.6.8.1 Data Formats for Waveform Playback
         2. 7.6.8.2 Open-Loop Mode
         3. 7.6.8.3 Closed-Loop Mode
      9. 7.6.9  Waveform Setup and Playback
         1. 7.6.9.1 Waveform Playback Using RTP Mode
         2. 7.6.9.2 Waveform Sequencer
         3. 7.6.9.3 Waveform Playback Triggers
            1. 7.6.9.3.1 Playback Trigger Without Automatic Brake into Standby
               1. 7.6.9.3.1.1 Playback Trigger With Automatic Brake into Standby (SimpleDrive)
      10. 7.6.10 117
9. 8 Register Map
   1. 8.1  Address: 0x00
   2. 8.2  Address: 0x01
   3. 8.3  Address: 0x02
   4. 8.4  Address: 0x03
   5. 8.5  Address: 0x04
   6. 8.6  Address: 0x05
   7. 8.7  Address: 0x06
   8. 8.8  Address: 0x07
   9. 8.9  Address: 0x08
   10. 8.10 Address: 0x09
   11. 8.11 Address: 0x0A
   12. 8.12 Address: 0x0B
   13. 8.13 Address: 0x0C
   14. 8.14 Address: 0x0D
   15. 8.15 Address: 0x0E
   16. 8.16 Address: 0x0F
   17. 8.17 Address: 0x10
   18. 8.18 Address: 0x11
   19. 8.19 Address: 0x12
   20. 8.20 Address: 0x13
   21. 8.21 Address: 0x14
   22. 8.22 Address: 0x15
   23. 8.23 Address: 0x16
   24. 8.24 Address: 0x17
   25. 8.25 Address: 0x18
   26. 8.26 Address: 0x19
   27. 8.27 Address: 0x1A
   28. 8.28 Address: 0x1B
   29. 8.29 Address: 0x1C
   30. 8.30 Address: 0x1D
   31. 8.31 Address: 0x1F
   32. 8.32 Address: 0x20
   33. 8.33 Address: 0x21
   34. 8.34 Address: 0x22
   35. 8.35 Address: 0x23
   36. 8.36 Address: 0x24
   37. 8.37 Address: 0x25
   38. 8.38 Address: 0x26
   39. 8.39 Address: 0x27
   40. 8.40 Address: 0x28
   41. 8.41 Address: 0x29
   42. 8.42 Address: 0x2A
   43. 8.43 Address: 0x2C
   44. 8.44 Address: 0x2E
   45. 8.45 Address: 0x2F
   46. 8.46 Address: 0x30
10.   Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
       1. 9.2.1 Design Requirements
       2. 9.2.2 Detailed Design Procedure
          1. 9.2.2.1 Actuator Selection
             1. 9.2.2.1.1 Eccentric Rotating-Mass Motors (ERM)
             2. 9.2.2.1.2 Linear Resonance Actuators (LRA)
                1. 9.2.2.1.2.1 Auto-Resonance Engine for LRA
          2. 9.2.2.2 Capacitor Selection
          3. 9.2.2.3 Interface Selection
          4. 9.2.2.4 Power Supply Selection
       3. 9.2.3 Application Curves
    3. 9.3 Initialization Set Up
       1. 9.3.1 Initialization Procedure
       2. 9.3.2 Typical Usage Examples
          1. 9.3.2.1 Play a Waveform or Waveform Sequence from the ROM Waveform Memory
          2. 9.3.2.2 Play a Real-Time Playback (RTP) Waveform
    4. 9.4 Power Supply Recommendations
    5. 9.5 Layout
       1. 9.5.1 Layout Guidelines
       2. 9.5.2 Layout Examples
11. 9 Device and Documentation Support
    1. 9.1 Device Support
       1. 9.1.1 Waveform Library Effects List
    2. 9.2 Trademarks
12. 10Revision History
13.   Mechanical, Packaging, and Orderable Information

DRV2625 Ultra Low Power Closed-Loop LRA/ERM Haptic Driver with Built-In Library