欧美日韩国产VA另类,我我要日韩一级黄片儿,久久AⅤ无码精品色午麻豆

SLVUCC1 November 2021 TPS63901

2.1.13 S1, S2, S3, S4, S5, S6 – IC Configuration (R2D Interface)

The output voltage is set according to Table 2-1 and Table 2-2. The configuration pins CFG1, CFG2, and CFG3 must not be left floating. Every CFG pin has 16 switches for the different resistor values, but only one switch at a time can be set to ON for each CFG pin. Turn ON the corresponding switches written in Table 2-1 and Table 2-2. V_O(2) is set by switch-blocks S1, S2, S4, and S5. V_O(1) is set by switch-blocks S3 and S6.

Example: V_O(2) (SEL = VO2) is set to 3.4 V and the current limit to unlimited. Set S1.1 to ON for CFG1, S5.1 to ON for CFG2, and S3.1 to ON to keep CFG3 from floating.

Table 2-1 Input Current Limit and Output Voltage V_O(2) (SEL = VO2) Settings

OUTPUT VOLTAGE V_O(2) (SEL = VO2)	INPUT CURRENT LIMIT
OUTPUT VOLTAGE V_O(2) (SEL = VO2)	UNLIMITED	100 mA	50 mA	25 mA	10 mA	5 mA	2.5 mA	1 mA
1.8 V	S1.1
1.8 V	S2.1	S2.2	S2.3	S2.4	S2.5	S2.6	S2.7	S2.8
1.9 V	S1.2
1.9 V	S2.1	S2.2	S2.3	S2.4	S2.5	S2.6	S2.7	S2.8
2.0 V	S1.3
2.0 V	S2.1	S2.2	S2.3	S2.4	S2.5	S2.6	S2.7	S2.8
2.1 V	S1.4
2.1 V	S2.1	S2.2	S2.3	S2.4	S2.5	S2.6	S2.7	S2.8
2.2 V	S1.5
2.2 V	S2.1	S2.2	S2.3	S2.4	S2.5	S2.6	S2.7	S2.8
2.3 V	S1.6
2.3 V	S2.1	S2.2	S2.3	S2.4	S2.5	S2.6	S2.7	S2.8
2.4 V	S1.7
2.4 V	S2.1	S2.2	S2.3	S2.4	S2.5	S2.6	S2.7	S2.8
2.5 V	S1.8
2.5 V	S2.1	S2.2	S2.3	S2.4	S2.5	S2.6	S2.7	S2.8
2.6 V	S4.1
2.6 V	S2.1	S2.2	S2.3	S2.4	S2.5	S2.6	S2.7	S2.8
2.7 V	S4.2
2.7 V	S2.1	S2.2	S2.3	S2.4	S2.5	S2.6	S2.7	S2.8
2.8 V	S4.3
2.8 V	S2.1	S2.2	S2.3	S2.4	S2.5	S2.6	S2.7	S2.8
2.9 V	S4.4
2.9 V	S2.1	S2.2	S2.3	S2.4	S2.5	S2.6	S2.7	S2.8
3.0 V	S4.5
3.0 V	S2.1	S2.2	S2.3	S2.4	S2.5	S2.6	S2.7	S2.8
3.1 V	S4.6
3.1 V	S2.1	S2.2	S2.3	S2.4	S2.5	S2.6	S2.7	S2.8
3.2 V	S4.7
3.2 V	S2.1	S2.2	S2.3	S2.4	S2.5	S2.6	S2.7	S2.8
3.3 V	S4.8
3.3 V	S2.1	S2.2	S2.3	S2.4	S2.5	S2.6	S2.7	S2.8
3.4 V	S1.1
3.4 V	S5.1	S5.2	S5.3	S5.4	S5.5	S5.6	S5.7	S5.8
3.5 V	S1.2
3.5 V	S5.1	S5.2	S5.3	S5.4	S5.5	S5.6	S5.7	S5.8
3.6 V	S1.3
3.6 V	S5.1	S5.2	S5.3	S5.4	S5.5	S5.6	S5.7	S5.8
3.7 V	S1.4
3.7 V	S5.1	S5.2	S5.3	S5.4	S5.5	S5.6	S5.7	S5.8
3.8 V	S1.5
3.8 V	S5.1	S5.2	S5.3	S5.4	S5.5	S5.6	S5.7	S5.8
3.9 V	S1.6
3.9 V	S5.1	S5.2	S5.3	S5.4	S5.5	S5.6	S5.7	S5.8
4.0 V	S1.7
4.0 V	S5.1	S5.2	S5.3	S5.4	S5.5	S5.6	S5.7	S5.8
4.1 V	S1.8
4.1 V	S5.1	S5.2	S5.3	S5.4	S5.5	S5.6	S5.7	S5.8
4.2 V	S4.1
4.2 V	S5.1	S5.2	S5.3	S5.4	S5.5	S5.6	S5.7	S5.8
4.3 V	S4.2
4.3 V	S5.1	S5.2	S5.3	S5.4	S5.5	S5.6	S5.7	S5.8
4.4 V	S4.3
4.4 V	S5.1	S5.2	S5.3	S5.4	S5.5	S5.6	S5.7	S5.8
4.5 V	S4.4
4.5 V	S5.1	S5.2	S5.3	S5.4	S5.5	S5.6	S5.7	S5.8
4.6 V	S4.5
4.6 V	S5.1	S5.2	S5.3	S5.4	S5.5	S5.6	S5.7	S5.8
4.7 V	S4.6
4.7 V	S5.1	S5.2	S5.3	S5.4	S5.5	S5.6	S5.7	S5.8
4.8 V	S4.7
4.8 V	S5.1	S5.2	S5.3	S5.4	S5.5	S5.6	S5.7	S5.8
5.0 V	S4.8
5.0 V	S5.1	S5.2	S5.3	S5.4	S5.5	S5.6	S5.7	S5.8

Table 2-2 Output Voltage V_O(1) (SEL = VO1) Settings

OUTPUT VOLTAGE V_O(1) (SEL = VO1)	CFG3
1.8 V	S3.1
2.0 V	S3.2
2.1 V	S3.3
2.2 V	S3.4
2.3 V	S3.5
2.4 V	S3.6
2.5 V	S3.7
2.6 V	S3.8
2.7 V	S6.1
2.8 V	S6.2
3.0 V	S6.3
3.3 V	S6.4
3.6 V	S6.5
4.0 V	S6.6
4.5 V	S6.7
5.0 V	S6.8