SLVU135A June 2005 – June 2021 TPS62110
| J1–VIN | Positive input connection from the input supply for U1 |
| J2–GND | Return connection from the input supply for U1, common with J4. |
| J3–VOUT | Output voltage connection |
| J4–GND | Output return connection, common with J2 |
| J5–LBO/PG | Low battery output (LBO) pulled up to Vout; low indicates LBI is below its threshold. Power good (PG), low indicates output voltage is less than 98.4% of the normal value. |
| JP1–SYNC PFM/PWM | Input for synchronization to external clock signal. High forces low-noise PWM mode, low enables power save PFM/PWM mode. |
| JP2–EN | Enable pin, low on the EN turns unit off. |