SLUU285D July 2007 – October 2021 TPS54283 , TPS54286 , TPS54383 , TPS54386
TPS54383EVM provides two test points for measuring the voltage generated by the module. This allows the user to measure the actual module output voltage without losses from output cables and connectors. All output voltage measurements should be made between TP3 and TP4. To use TP3 and TP4, connect a voltmeter positive terminal to TP3 and negative terminal to TP4. For Output ripple measurements, TP3 and TP4 allow a user to limit the ground loop area by using the Tip and Barrel measurement technique shown in Figure 4-2. All output ripple measurements should be made using the Tip and Barrel measurement.