SLOU441 July 2016 TPA3255
Configure the EVM as follows for 4 single-ended operations:
| Jumper | Setting | Comment |
|---|---|---|
| J29 | IN | PVDD to 15-V BUCK |
| J31 | IN | 12-V LDO to 12-V TERM |
| J32 | IN | 3.3-V LDO to 3.3-V TERM |
| J33 | IN | 3.3-V LDO to 3.3-V TERM |
| J21 | IN | CSTART SE |
| J16 | 3 to 4 | MASTER MODE |
| J5 | 1 to 2 | M1 – 4XSE |
| J6 | 1 to 2 | M2 – 4XSE |
| J22 | OUT | OUTA CAP SHUNT |
| J23 | OUT | OUTB CAP SHUNT |
| J24 | OUT | OUTC CAP SHUNT |
| J25 | OUT | OUTD CAP SHUNT |
| J26 | 2 to 3 | INC SELECT |
| J27 | 2 to 3 | IND SELECT |
| J7 | OUT | PBTL SELECT INC |
| J8 | OUT | PBTL SELECT IND |
| J10 | OUT | INC/D DIFF INPUT |
| J12 | OUT | INC/D DIFF INPUT |
| J4 | 2 to 3 | INA/B DIFF INPUT |
| J19 | 2 to 3 | INC/D DIFF INPUT |
spacer
spacer
spacer
spacer
spacer
NOTE
The performance of the TPA3255EVM/TPA3255DDV is dependent on the power supply. Design the power supply with margins that can deliver the needed power. In low-frequency applications additional bulk capacitance may be needed. Replacing the bulk capacitors on the TPA3255EVM with more capacitance may be necessary, depending on the power supply used.