4 Pin Failure Mode Analysis (Pin FMA)

This section provides a Failure Mode Analysis (FMA) for the pins of the SN6505x-Q1 (SOT-23 (6) package). The failure modes covered in this document include the typical pin-by-pin failure scenarios:

• Pin short-circuited to Ground (see Table 4-2)
• Pin open-circuited (seeTable 4-3)
• Pin short-circuited to an adjacent pin (see Table 4-4)
• Pin short-circuited to supply (see Table 4-5)

Table 4-2 through Table 4-5 also indicate how these pin conditions can affect the device as per the failure effects classification in Table 4-1.

Following are the assumptions of use and the device configuration assumed for the pin FMA in this section:

• External push-pull transformer connected with a winding between D1 and V_CC, another winding connected between D2 and V_CC.