SBAU373A April 2021 – June 2022
The differential analog output voltage from the EVM is applied directly to J4.3 and J4.2. Table 4-3 lists the details of J4.
| Pin Number | Signal | Description |
|---|---|---|
| J4.3 | OUTP | Connection to the noninverting analog output terminal (pin 7) |
| J4.2 | OUTN | Connection to the inverting analog output terminal (pin 6) |
| J4.1 | GND2 | Connection to the GND2 terminal (pin 5) |
The VDD2 power input to the EVM printed circuit board can be applied directly to J2 pins 1 and 2. Table 4-4 lists the details of J2.
| Pin Number | Signal | Description |
|---|---|---|
| J2.2 | VDD2 | Connection to the VDD2 terminal (pin 8) |
| J2.1 | GND2 | Connection to the GND2 terminal (pin 5) |