| PIN NAME | TEST CONDITIONS | VALUE | UNIT |
|---|
| RIN, DOUT(2) | HBM | ±15,000 | V |
| IEC 61000-4-2 Contact
Discharge(1)(2) | ±8,000 |
| IEC 61000-4-2 Air-Gap
Discharge(1)(2) | ±15,000 |
(1) For the RGT and PW package only, a minimum of 1μF capacitor is required between VCC and GND to meet the specified IEC-ESD level.
(2) For optimized IEC ESD performance for DYY
package, the recommendation is to have series
resistor (≥ 50?), on all logic inputs directly
connected to power or ground, to minimize the
transient currents going into or out of the logic
pins.