4 修訂歷史記錄

Changes from H Revision (September 2015) to I Revision

• Changed 更改了數據表的標題Go
• Changed the pin number column headers from TPS65072 and TPS6507x to TPS6507x and TPS65072 in the Pin Functions tableGo
• Changed 靜電放電注意事項聲明Go

Changes from G Revision (May 2013) to H Revision

• Added 添加了 ESD 額定值 表、特性 說明 部分、器件功能模式、應用和實施 部分、電源相關建議 部分、布局 部分、器件和文檔支持 部分以及機械、封裝和可訂購信息 部分Go

Changes from F Revision (July 2012) to G Revision

• Changed the PPATH1. Register Address: 01h section table. Default row From: xx00011 To: xx00110Go

Changes from E Revision (February) to F Revision

• Added TPS650701 and TPS650721 device specs to the data sheetGo

Changes from C Revision (August 2011) to D Revision

• Changed text in the Low Dropout Voltage Regulators section, second paragraph – the sentence "The output voltage for LDO1 is defined by the settings in Register DEFLDO1" to "The output voltage for LDO1 is defined by the settings in Register LDO_CTRL1"Go

Changes from B Revision (December 2009) to C Revision

• Changed Input Current Limit MIN value from 2000 to 1900 for I_AC2500 specificationGo
• Changed K_ISET spec MIN/TYP/MAX values from 840/900/1000 to 820/950/1080 respectively for a charge current of 1500 mAGo
• Changed K_ISET spec MIN/TYP/MAX values from 930/1100/1200 to 890/1050/1200 respectively for a charge current of 100 mAGo

Changes from A Revision (August 2009) to B Revision

• Changed 將標題從“.....導航系統”更改為“.....電池供電型系統”Go
• Changed status of TPS65072RSL device to Production DataGo
• Deleted "Product Preview" from TPS65072 pinout graphicGo
• Changed V_OUT Parameter from: "Fixed output voltage; PFM mode" to: "DC output voltage accuracy; PFM mode" Go
• Changed V_OUT Parameter from: "Fixed output voltage; PWM mode" to: "DC output voltage accuracy; PWM mode" Go
• Changed part number from TPS65072 to TPS650732 at the DCDC3 Converter V_OUT Default output voltage spec. to correct typo error Go
• Changed V_OUT Parameter from: "Fixed output voltage; PFM mode" to: "DC output voltage accuracy; PFM mode" Go
• Changed V_OUT Parameter from: "Fixed output voltage; PWM mode" to: "DC output voltage accuracy; PWM mode" Go
• Added test conditions for I_DISCH specificationGo
• Deleted "Product Preview" cross reference and Tablenote with reference to device TPS65072 Go
• Changed TSC equations in Table 3 to correct typographical errors Go
• Added X_pos= ADRESULT /1024 to X position Equation list of Table 3Go
• Added Y_pos= ADRESULT /1024 to Y position Equation list of Table 3Go
• Added Sub-section Performing Measurements Using the Touch Screen Controller for Programmers benefitGo
• Changed Bit 7 explanation from '...when input voltage at pin AC detected' to '...when no input voltage at pin AC is detected' .Go
• Changed Bit 0 explanation from '...when input voltage at pin AC detected' to '....when no input voltage at pin AC is detected'.Go
• Deleted "Product Preview" status & footnote for the TPS65072 device listing. Go
• Deleted "Product Preview" footnote in reference to the TPS65072 device status.Go
• Changed Schematic entity part number from OMAP3505 to AM3505Go