免费无码毛片一区二区三区A片,久久久久久欧美精品se一二三四,日本91偷拍视频

ZHCSDL4 April 2015 TPS61046

PRODUCTION DATA.

封裝選項

機械數據 (封裝 | 引腳)

YFF|6
- MXBG078Z

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

zhcsdl4_oa

7 Specifications

7.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted) ⁽¹⁾

		MIN	MAX	UNIT
Voltage range at terminals ⁽²⁾	VIN, EN, FB	– 0.3	6	V
Voltage range at terminals ⁽²⁾	SW, VOUT	–0.3	32	V
Operating junction temperature range, T_J		–40	150	°C
Storage temperature range, T_stg		–65	150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) All voltage values are with respect to network ground terminal.

7.2 ESD Ratings

			VALUE	UNIT
V_(ESD)⁽¹⁾	Electrostatic discharge	Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins⁽²⁾	±2000	V
V_(ESD)⁽¹⁾	Electrostatic discharge	Charged device model (CDM), per JEDEC specification JESD22-C101, all pins⁽³⁾	±500	V

(1) Electrostatic discharge (ESD) to measure device sensitivity and immunity to damage caused by assembly line electrostatic discharges in to the device.

(2) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(3) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

7.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

		MIN	TYP	MAX	UNIT
V_IN	Input voltage range	1.8		5.5	V
V_OUT	Output voltage range	4.5		28	V
L	Effective inductance range	1.0×0.7	10	22×1.3	µH
C_IN	Effective input capacitance range	0.22	1.0		µF
C_OUT	Effective output capacitance range	0.22	1.0	10	µF
T_J	Operating junction temperature	–40		125	°C

7.4 Thermal Information

THERMAL METRIC⁽¹⁾		TPS61046	UNIT
		YFF (WCSP)
		6 BALLS
R_θJA	Junction-to-ambient thermal resistance	135.4	°C/W
R_θJC(top)	Junction-to-case (top) thermal resistance	1.6
R_θJB	Junction-to-board thermal resistance	22.3
ψ_JT	Junction-to-top characterization parameter	5.6
ψ_JB	Junction-to-board characterization parameter	22.3
R_θJC(bot)	Junction-to-case (bottom) thermal resistance	n/a

(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.

7.5 Electrical Characteristics

T_J = –40°C to 125°C, V_IN = 3.6 V and V_OUT = 12 V. Typical values are at T_J = 25°C, unless otherwise noted.

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
POWER SUPPLY
V_IN	Input voltage range		1.8		5.5	V
V_{IN_UVLO}	Under voltage lockout threshold	V_IN rising		1.75	1.8	V
V_{IN_UVLO}	Under voltage lockout threshold	V_IN falling		1.55	1.6	V
V_{IN_HYS}	VIN UVLO hysteresis			200		mV
I_{Q_VIN}	Quiescent current into VIN pin	IC enabled, no load, no switching, V_IN = 1.8 V to 5.5 V, V_OUT = 12 V		110	200	µA
I_SD	Shutdown current into VIN pin	IC disabled, V_IN = 1.8 V to 5.5 V, T_J up to 85°C		0.1	0.8	µA
I_SD	Shutdown current into VIN pin	IC disabled, V_IN = 1.8 V to 5.5 V, T_J up to 60°C			0.5	µA
OUTPUT
V_OUT	Output voltage range		4.5		28	V
V_{OUT_12V}	12-V output voltage accuracy	FB pin connected to VIN pin, T_J=0°C to 125°C	11.7	12	12.3	V
V_REF	Feedback voltage	PWM mode, T_J=0°C to 125°C	0.779	0.795	0.811	V
V_REF	Feedback voltage	PFM mode, T_J=0°C to 125°C		0.803		V
V_OVP	Output overvoltage protection threshold		28	29.2	30.4	V
V_{OVP_HYS}	Over voltage protection hysteresis			0.8		V
I_{FB_LKG}	Leakage current into FB pin				200	nA
I_{SW_LKG}	Leakage current into SW pin	IC disabled, T_J up to 85°C			500	nA
POWER SWITCH
R_DS(on)	Isolation MOSFET on resistance	V_OUT = 12 V		850		mΩ
R_DS(on)	Low-side MOSFET on resistance	V_OUT = 12 V		450		mΩ
f_SW	Switching frequency	V_IN = 3.6 V, V_OUT = 12 V, PWM mode	850	1050	1250	kHz
t_{ON_min}	Minimal switch on time			150	250	ns
I_{LIM_SW}	Peak switch current limit	V_IN = 3.6 V, V_OUT = 12 V	600	900	1200	mA
I_{LIM_CHG}	Pre-charge current	V_IN = 3.6 V, V_OUT = 0 V		30	50	mA
t_STARTUP	Startup time	V_OUT from V_IN to 12 V, C_{OUT_effective} = 2.2 µF, I_OUT = 0 A	2	5		ms
LOGIC INTERFACE
V_{EN_H}	EN Logic high threshold				1	V
V_{EN_L}	EN Logic Low threshold		0.4			V
PROTECTION
T_SD	Thermal shutdown threshold	T_Jrising		150		°C
T_{SD_HYS}	Thermal shutdown hysteresis	T_J falling below T_SD		20		°C

7.6 Typical Characteristics

V_IN = 3.6 V, V_OUT = 12 V, T_J = –40°C to 125°C, unless otherwise noted.

V_IN = 1.8 V, 3.0 V, 3.6 V, 4.2 V, V_OUT = 12 V

Figure 1. Efficiency vs Output Current

V_IN = 3.6 V, V_OUT = 12 V, FB pin connected to VIN pin

Figure 3. 12-V Fixed Output Voltage vs Temperature

V_IN = 3.6 V, V_OUT = 12 V, No switching

Figure 5. Quiescent Current vs Temperature

V_IN = 3.6 V

Figure 7. Shutdown Current vs Temperature

	V_IN = 1.8 V ~ 6 V, V_OUT = 12 V

Figure 9. Current Limit vs Temperature

V_IN = 3.6 V, V_OUT = 5 V, 12 V, 24 V

Figure 2. Efficiency vs Output Current

V_IN = 3.6 V, V_OUT = 12 V

Figure 4. Reference Voltage vs Temperature

V_IN = 1.8 V ~ 6 V, V_OUT = 12 V, No switching

Figure 6. Quiescent Current vs Input Voltage

V_IN = 3.6 V, V_OUT = 12 V

Figure 8. Current Limit vs Temperature