国产做国产爱免费视频,国产日韩视频一区二区三区,亚洲制服无码一区二区三区

ZHCSHZ7A April 2018 – December 2018 TLV759P

PRODUCTION DATA.

封裝選項

機械數據 (封裝 | 引腳)

DRV|6
- MPDS216E

散熱焊盤機械數據 (封裝 | 引腳)

DRV|6
- QFND087M

訂購信息

6.5 Electrical Characteristics

at operating temperature range (T_J = –40°C to 125°C), V_IN = V_OUT(NOM) + 0.5 V or 1.5 V (whichever is greater), I_OUT = 1 mA, V_EN = V_IN, and C_IN = C_OUT = 1 μF, unless otherwise noted. All typical values at T_J = 25°C.

PARAMETER		TEST CONDITIONS		MIN	TYP	MAX	UNIT
V_FB	Feedback voltage	T_J = 25°C			0.55		V
	Output accuracy⁽¹⁾	T_J = 25°C		–0.7%		0.7%
		–40°C ≤ T_J ≤ +85°C		–1%		1%
		–40°C ≤ T_J ≤ +125°C		–1.5%		1.5%
	Line regulation	V_OUT(NOM) + 0.5 V⁽²⁾ ≤ V_I_N ≤ 6.0 V			2	7.5	mV
	Load regulation	0.1 mA ≤ I_OUT ≤ 1 A, V_IN ≥ 2.0 V			0.03		V/A
I_GND	Ground current	I_OUT = 0 mA	T_J = 25°C	10	25	31	µA
I_GND	Ground current	I_OUT = 0 mA	–40°C ≤ T_J ≤ +125°C			35	µA
I_SHDN	Shutdown current	V_EN ≤ 0.3 V, 1.5 V ≤ V_IN ≤ 6.0 V			0.1	1	µA
I_FB	Feedback pin current				0.01	0.1	µA
I_CL	Output current limit	V_IN = V_OUT(NOM) + 1.0 V	V_OUT = V_OUT(NOM) - 0.2 V, V_OUT< 1.5 V	1.22	1.44	1.83	A
I_CL	Output current limit	V_IN = V_OUT(NOM) + 1.0 V	V_OUT = 0.9 x V_OUT(NOM), V_OUT≥ 1.5 V	1.22	1.44	1.83	A
I_SC	Short-circuit current limit	V_IN = V_OUT(NOM) + 1.0 V	V_OUT = 0 V		770		mA
V_DO	Dropout voltage	I_OUT = 1 A, –40°C ≤ T_J ≤ +125°C, V_OUT = 0.95 × V_OUT(NOM)	0.65 V ≤ V_OUT < 0.8 V		896	1050	mV
			0.8 V ≤ V_OUT < 0.9 V		765	920
			0.9 V ≤ V_OUT < 1.0 V		700	850
			1.0 V ≤ V_OUT < 1.2 V		600	750
			1.2 V ≤ V_OUT < 1.5 V		464	585
			1.5 V ≤ V_OUT < 1.8 V		332	440
			1.8 V ≤ V_OUT < 2.5 V		264	360
			2.5 V ≤ V_OUT < 3.3 V		193	270
			3.3 V ≤ V_OUT ≤ 5.5 V		161	225
PSRR	Power-supply rejection ratio	V_IN = V_OUT(NOM) + 1 V, I_OUT = 50 mA	f = 1 kHz		50		dB
			f = 100 kHz		45
			f = 1 MHz		30
V_n	Output noise voltage	BW = 10 Hz to 100 kHz, V_OUT = 0.9 V			53		µV_RMS
V_UVLO	Undervoltage lockout	V_IN rising		1.21	1.33	1.47	V
V_UVLO	Undervoltage lockout	V_IN falling		1.17	1.29	1.42	V
V_{UVLO, HYST}	Undervoltage lockout hysteresis	V_IN hysteresis			40		mV
t_STR	Startup time	From EN low-to-high transition to V_OUT= V_OUT(NOM) x 95%			500		µs
V_EN(HI)	EN pin high voltage			1.0			V
V_EN(LO)	EN pin low voltage					0.3	V
I_EN	Enable pin current	V_IN = V_EN = 6.0 V			10		nA
R_PULLDOWN	Pulldown resistance	V_IN = 6.0 V			95		Ω
T_SD	Thermal shutdown	Shutdown, temperature increasing			170		°C
T_SD	Thermal shutdown	Reset, temperature decreasing			155		°C

(1) When the device is connected to external feedback resistors at the FB pin, external resistor tolerances are not included

(2) V_IN = 1.5V for V_OUT < 1.0 V