国产高清视频免费在线观看,国产麻无矿码直接观看,日本欧美视频在线观看

ZHCS484H October 2011 – January 2017 TLV62080 , TLV62084 , TLV62084A

UNLESS OTHERWISE NOTED, this document contains PRODUCTION DATA.

封裝選項

機械數據 (封裝 | 引腳)

DSG|8
- MPDS308C

散熱焊盤機械數據 (封裝 | 引腳)

DSG|8
- QFND141I

訂購信息

7 Specifications

7.1 Absolute Maximum Ratings⁽¹⁾

		MIN	MAX	UNIT
Voltage range⁽²⁾	VIN, PG, VOS	– 0.3	7	V
	SW	– 0.3	V_IN + 0.3	V
	SW (AC, less than 10 ns)⁽³⁾	– 3.0	10	V
	FB	– 0.3	3.6	V
	EN	– 0.3	V_IN+ 0.3	V
Power Good Sink Current	PG		1	mA
Operating junction temperature range, T_J		– 40	150	°C
Storage temperature range, T_stg		– 65	150	°C

(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability.

(2) All voltage values are with respect to network ground terminal.

(3) While switching.

7.2 ESD Ratings

			VALUE	UNIT
V_(ESD)	Electrostatic discharge	Human body model (HBM) ESD stress voltage⁽¹⁾	±2000	V
V_(ESD)	Electrostatic discharge	Charged device model (CDM) ESD stress voltage⁽²⁾	±500	V

(1) Level listed above is the passing level per ANSI/ESDA/JEDEC JS-001. JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2) Level listed above is the passing level per EIA-JEDEC JESD22-C101. JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

7.3 Recommended Operating Conditions⁽¹⁾

		MIN	MAX	UNIT
V_IN	Input voltage range, TLV62080	2.5	6	V
V_IN	Input voltage range, TLV62084, TLV62084A	2.7	6	V
T_J	Operating junction temperature	–40	125	°C

(1) Refer to the Application Information section for further information.

7.4 Thermal Information

THERMAL METRIC⁽¹⁾		TLV6208x DSG (8 PINS)	UNITS
θ_JA	Junction-to-ambient thermal resistance	59.7	°C/W
θ_JCtop	Junction-to-case (top) thermal resistance	70.1	°C/W
θ_JB	Junction-to-board thermal resistance	30.9	°C/W
ψ_JT	Junction-to-top characterization parameter	1.4	°C/W
ψ_JB	Junction-to-board characterization parameter	31.5	°C/W
θ_JCbot	Junction-to-case (bottom) thermal resistance	8.6	°C/W

(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report.

7.5 Electrical Characteristics

Over recommended free-air temperature range, T_A = –40°C to 85°C, typical values are at T_A = 25°C (unless otherwise noted), V_IN= 3.6 V.

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
SUPPLY
V_IN	Input voltage range,TLV62080		2.5		6	V
V_IN	Input voltage range,TLV62084, TLV62084A		2.7		6	V
I_Q	Quiescent current into VIN	I_OUT = 0 mA, Device not switching		30		uA
I_SD	Shutdown current into VIN	EN = LOW			1	µA
V_UVLO	Under voltage lock out	Input voltage falling		1.8	2	V
V_UVLO	Under voltage lock out hysteresis	Rising above V_UVLO		120		mV
T_JSD	Thermal shutdown	Temperature rising		150		°C
T_JSD	Thermal shutdown hysteresis	Temperature falling below T_JSD		20		°C
LOGIC INTERFACE (EN)
V_IH	High level input voltage	2.5 V ≤ V_IN ≤ 6 V	1			V
V_IL	Low level input voltage	2.5 V ≤ V_IN ≤ 6 V			0.4	V
I_LKG	Input leakage current			0.01	0.5	µA
POWER GOOD
V_PG	Power good threshold	V_OUT falling referenced to V_OUT nominal	–15	–10	–5	%
V_PG	Power good hysteresis			5		%
V_OL	Low level voltage	I_sink = 500 µA			0.3	V
I_PG,LKG	PG Leakage current	V_PG = 5.0 V		0.01	0.1	µA
OUTPUT
V_OUT	Output voltage range		0.5		4	V
V_FB	Feedback regulation voltage	V_IN ≥ 2.5 V and V_IN ≥ V_OUT+ 1 V	0.438	0.45	0.462	V
I_FB	Feedback input bias current	V_FB = 0.45 V		10	100	nA
R_DIS	Output discharge resistor	EN = LOW, V_OUT = 1.8 V		1		kΩ
R_DS(on)	High side FET on-resistance	I_SW = 500 mA		120		mΩ
R_DS(on)	Low side FET on-resistance	I_SW = 500 mA		90		mΩ
I_LIM	High side FET switch current-limit, TLV62080	Rising inductor current	1.6	2.8	4	A
I_LIM	High side FET switch current-limit, TLV62084, TLV62084A	Rising inductor current	2.3	2.8	4	A

7.6 Typical Characteristics

See Typical Application for characterization setup.

space

Table 1. Table of Graphs

		FIGURE
Efficiency	Load current, V_OUT = 0.9 V	Figure 1
	Load current, V_OUT = 1.2 V	Figure 2
	Load current, V_OUT = 2.5 V	Figure 3
Output Voltage Accuracy	Input Voltage, V_OUT = 0.9 V	Figure 4
	Input Voltage, V_OUT = 2.5 V	Figure 5
	Load current, V_OUT = 0.9 V	Figure 6
	Load current, V_OUT = 2.5 V	Figure 7
Switching Frequency	Load current, V_OUT = 2.5 V	Figure 8

TLV62080 TLV62084 TLV62084A D001_SLVSAK9.gif

V_OUT = 0.9 V

Figure 1. Efficiency vs Load Current

TLV62080 TLV62084 TLV62084A D003_SLVSAK9.gif

V_OUT = 2.5 V

Figure 3. Efficiency vs Load Current

TLV62080 TLV62084 TLV62084A D002_SLVSAK9.gif

V_OUT = 1.2 V

Figure 2. Efficiency vs Load Current

TLV62080 TLV62084 TLV62084A D004_SLVSAK9.gif

V_OUT = 0.9 V

Figure 4. Output Voltage vs Input Voltage

TLV62080 TLV62084 TLV62084A D005_SLVSAK9.gif

V_OUT = 2.5 V

Figure 5. Output Voltage vs Input Voltage

TLV62080 TLV62084 TLV62084A D007_SLVSAK9.gif

V_IN = 3.6 V

Figure 7. Output Voltage vs Load Current

TLV62080 TLV62084 TLV62084A D006_SLVSAK9.gif

V_IN = 3.6 V

Figure 6. Output Voltage vs Load Current

TLV62080 TLV62084 TLV62084A D008_SLVSAK9.gif

V_OUT = 2.5 V

Figure 8. Switching Frequency vs Output Current