1997亚洲视频,男女一边摸一边做爽的免费视频,91视频久久久久

ZHCSS29R April 2004 – April 2024 TL103W , TL103WA , TL103WB

PRODUCTION DATA

封裝選項

請參考 PDF 數據表獲取器件具體的封裝圖。

機械數據 (封裝 | 引腳)

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

5.6 Electrical Characteristics: OP AMP2 (Independent Amplifier)

V_CC+ = 5V, V_CC- = GND, T_A= 25°C (unless otherwise noted)

PARAMETER		TEST CONDITIONS			T_A	MIN	TYP	MAX	UNIT
V_IO	Input offset voltage	V_ICM = 0V		TL103W			±1	±4	mV
				TL103W	Full range			±5
				TL103WA			±0.5	±3.0
				TL103WA	Full range			±5
				TL103WB			±0.3	±2
				TL103WB	Full range			±2.5
αV_IO	Input offset-voltage drift			TL103W/TL103WA	Full range		±7		μV/°C
αV_IO	Input offset-voltage drift			TL103WB	Full range		±2		μV/°C
I_IO	Input offset current			TL103W/TL103WA			±2	±75	nA
				TL103W/TL103WA	Full range			±150
				TL103WB			±0.5	±4
				TL103WB	Full range			±5
I_IB	Input bias current			TL103W/TL103WA			-20	-150	nA
				TL103W/TL103WA	Full range			-200
				TL103WB			-15	-35
				TL103WB	Full range			-50
A_VD	Large-signal voltage gain	V_CC+ = 15V, R_L = 2k?, VO = 1.4V to 11.4V		TL103W/TL103WA		50	100		V/mV
				TL103W/TL103WA	Full range	25	100
				TL103WB		77	210
				TL103WB	Full range	45	210
PSRR	Supply-voltage rejection ratio	V_CC+ = 5V to 30V		TL103W/TL103WA		65	100		dB
PSRR	Supply-voltage rejection ratio	V_CC+ = 5V to 30V		TL103WB		99	114		dB
V_ICR	Input common-mode voltage range	V_CC+ = 30V				V_CC-		(V_CC+) – 1.5	V
V_ICR	Input common-mode voltage range	V_CC+ = 30V			Full range	V_CC-		(V_CC+) – 2	V
CMRR	Common-mode rejection ratio	V_CC+ = 30V		TL103W/TL103WA		70	95		dB
				TL103W/TL103WA	Full range	60
				TL103WB		93	104
				TL103WB	Full range	70
I_O	Output current	V_CC+ = 15V, V_O = 2V, V_ID = 1V	Source			20	40		mA
			Sink	TL103W/TL103WA		10	12
			Sink	TL103WB		10	24
		V_CC+ = 15V, V_O = 0.2V, V_ID = -1V	Sink	TL103W/TL103WA		12	50		μA
		V_CC+ = 15V, V_O = 0.2V, V_ID = -1V	Sink	TL103WB		60	100		μA
I_SC	Short-circuit to GND	V_CC+ = 15V					±40	±68	mA
V_O	Voltage output swing from rail	V_CC+ = 30V, R_L = 2k?	Positive Rail (V_CC+)	TL103W/TL103WA		26	27		V
				TL103W/TL103WA	Full range	26
				TL103WB		27.4	28.3
				TL103WB	Full range	27.4
		V_CC+ = 30V, R_L = 10k?	Positive Rail (V_CC+)	TL103W/TL103WA		27	28
				TL103W/TL103WA	Full range	27
				TL103WB		27.6	28.6
				TL103WB	Full range	27.6
		R_L = 10k?	Negative Rail (V_CC-)				5	20	mV
		R_L = 10k?	Negative Rail (V_CC-)		Full range			20	mV
SR	Slew rate at unity gain	V_CC+ = 15V, C_L = 100pF, R_L = 2k?, V_I = 0.5V to 2V, unity gain		TL103W/TL103WA		0.2	0.4		V/μs
SR	Slew rate at unity gain			TL103WB		0.2	0.5		V/μs
GBW	Gain bandwidth product	V_CC+ = 30V, V_I = 10mV, C_L = 100pF, R_L = 2k?, f = 100kHz		TL103W/TL103WA		0.5⁽¹⁾	0.9		MHz
GBW	Gain bandwidth product	V_CC+ = 36V, V_I = 10mV, C_L = 100pF, R_L = 2k?, f = 100kHz		TL103WB		0.7⁽¹⁾	1.2		MHz
THD	Total harmonic distortion	V_CC+ = 30V, V_O = 2V_PP, C_L = 100pF, R_L = 2k?, f = 1kHz, A_V = 20dB		TL103W/TL103WA			0.02		%
THD	Total harmonic distortion	V_CC+ = 36V, V_O = 2V_PP, C_L = 100pF, R_L = 2k?, f = 1kHz, A_V = 20dB		TL103WB			0.005		%
V_n	Equivalent input noise voltage	V_CC+ = 30V, R_S = 100 ?, f = 1kHz		TL103W/TL103WA			50		nV/√Hz
V_n	Equivalent input noise voltage	V_CC+ = 36V, R_S = 100 ?, f = 1kHz		TL103WB			38		nV/√Hz
I_CC	Total supply current, excluding cathode-current reference (both amplifiers)	V_CC+ = 5V, no load		TL103W/TL103WA			0.7	1.2	mA
		V_CC+ = 30V, no load		TL103W/TL103WA	Full range			2
		V_CC+ = 5V, no load		TL103WB			0.55	0.77
		V_CC+ = 36V, no load		TL103WB	Full range			1.35

(1) Not tested in production, limits set by characterization and simulation.