SLVSJY8 November 2025 THVD4431A
PRODUCTION DATA
- 1
- 1 Features
- 2 Applications
- 3 Description
- 4 Pin Configuration and Functions
-
5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 ESD Ratings [IEC]
- 5.4 Recommended Operating Conditions
- 5.5 Thermal Information
- 5.6 Power Dissipation
- 5.7 Electrical Characteristics
- 5.8 Switching Characteristics_RS-485_500kbps
- 5.9 Switching Characteristics_RS-485_20Mbps
- 5.10 Switching Characteristics, Driver_RS232
- 5.11 Switching Characteristics, Receiver_RS232
- 5.12 Switching Characteristics_MODE switching
- 5.13 Switching Characteristics_RS-485_Termination resistor
- 5.14 Switching Characteristics_Loopback mode
- 5.15 Typical Characteristics
- 6 Parameter Measurement Information
- 7 Detailed Description
- 8 Application and Implementation
- 9 Device and Documentation Support
- 10Revision History
- 11Mechanical, Packaging, and Orderable Information
5.15 Typical Characteristics
| RS-485 Full Duplex mode | V(R3R4) = 2V |
| DIR = GND | TA = 25°C |
| DIR = VIO | TA = 25°C |
| TA = 25°C | RL = 54Ω | DIR = L3 = VIO |
| RS-485 Full Duplex mode | ||
| Bus Load = 54Ω || 50pF | SLR = VIO | DIR = VIO |
| Bus Load = 54Ω || 50pF | SLR = VIO | DIR = VIO |
| TA = 25°C | RL = 54Ω | DIR = VIO |
| TA = 25°C | SLR = VIO | |
| All 3 drivers loaded with 5kΩ ; device in RS-232 3T5R mode | ||
| L4, L6 = static | L3 toggling | |
| RS-485 Full Duplex mode | V(R3R4) = 2V |
| DIR = VIO | TA = 25°C |
| DIR = VIO | TA = 25°C |
| DIR = L3 = VIO | RL = 54Ω | |
| RS-485 Full Duplex mode | ||
| Bus Load = 5Ω || 50pF | SLR = GND | DIR = VIO |
| Bus Load = 54Ω || 50pF | SLR = GND | DIR = VIO |
| TA = 25°C | RL = 54Ω | DIR = VIO |
| TA = 25°C | SLR = GND | |
| All 3 drivers loaded with 5kΩ ; device in RS-232 3T5R mode | ||
| L4, L6 = static | L3 toggling | |