SCES528F December 2003 – May 2017 SN74LVC1G373
PRODUCTION DATA.
- 1 Features
- 2 Applications
- 3 Description
- 4 Revision History
- 5 Pin Configuration and Functions
-
6 Specifications
- 6.1 Absolute Maximum Ratings
- 6.2 ESD Ratings
- 6.3 Recommended Operating Conditions
- 6.4 Thermal Information
- 6.5 Electrical Characteristics
- 6.6 Timing Requirements: TA = -40°C to +85°C
- 6.7 Timing Requirements: TA = -40°C to +125°C
- 6.8 Switching Characteristics: TA = -40°C to +85°C
- 6.9 Switching Characteristics: TA = -40°C to +85°C
- 6.10 Switching Characteristics: TA = -40°C to +125°C
- 6.11 Operating Characteristics
- 6.12 Typical Characteristics
- 7 Parameter Measurement Information
- 8 Detailed Description
- 9 Application and Implementation
- 10Power Supply Recommendations
- 11Layout
- 12Device and Documentation Support
- 13Mechanical, Packaging, and Orderable Information
封裝選項
請參考 PDF 數據表獲取器件具體的封裝圖。
機械數據 (封裝 | 引腳)
- DBV|6
- YZP|6
- DCK|6
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)(1)| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| VCC | Supply voltage | –0.5 | 6.5 | V | |
| VI | Input voltage(2) | –0.5 | 6.5 | V | |
| VO | Voltage range applied to any output in the high-impedance or power-off state(2)(3) | –0.5 | 6.5 | V | |
| VO | Voltage range applied to any output in the high or low state(2)(3) | –0.5 | VCC + 0.5 | V | |
| IIK | Input clamp current | VI < 0 | –50 | mA | |
| IOK | Output clamp current | VO < 0 | –50 | mA | |
| IO | Continuous output current | ±50 | mA | ||
| Continuous current through VCC or GND | ±100 | mA | |||
| TJ | Absolute maximum Junction temperature | 150 | °C | ||
| Tstg | Storage temperature | –65 | 150 | °C | |
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The value of VCC is provided in the Recommended Operating Conditions.
6.2 ESD Ratings
| VALUE | UNIT | |||
|---|---|---|---|---|
| V(ESD) | Electrostatic discharge | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) | ±2000 | V |
| Charged-device model (CDM), per JEDEC specification JESD22-C101(2) | ±1500 | |||
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. CDM tested on DBV package
6.3 Recommended Operating Conditions
See (1)
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. See Implications of Slow or Floating CMOS Inputs (SCBA004).
6.4 Thermal Information
| THERMAL METRIC(1) | SN74LVC1G373 | UNIT | |||
|---|---|---|---|---|---|
| DBV (SOT-23) | DCK (SC70) | YZP (DSBGA) | |||
| 6 PINS | 6 PINS | 6 PINS | |||
| RθJA | Junction-to-ambient thermal resistance | 219.8 | 255.2 | 131 | °C/W |
| RθJC(top) | Junction-to-case (top) thermal resistance | 189 | 121.9 | 1.3 | °C/W |
| RθJB | Junction-to-board thermal resistance | 65.8 | 58 | 22.6 | °C/W |
| ψJT | Junction-to-top characterization parameter | 67.3 | 7.2 | 5.2 | °C/W |
| ψJB | Junction-to-board characterization parameter | 65.2 | 57.3 | 22.6 | °C/W |
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report.
6.5 Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)| PARAMETER | TEST CONDITIONS | VCC | MIN | TYP(1) | MAX | UNIT | |
|---|---|---|---|---|---|---|---|
| VOH | IOH = –100 µA | 1.65 V to 5.5 V | VCC – 0.1 | V | |||
| IOH = –4 mA | 1.65 V | 1.2 | |||||
| IOH = –8 mA | 2.3 V | 1.9 | |||||
| IOH = –16 mA | 3 V | 2.4 | |||||
| IOH = –24 mA | 2.3 | ||||||
| IOH = –32 mA | 4.5 V | 3.8 | |||||
| VOL | IOL = 100 µA | 1.65 V to 5.5 V | 0.1 | V | |||
| IOL = 4 mA | 1.65 V | 0.45 | |||||
| IOL = 8 mA | 2.3 V | 0.3 | |||||
| IOL = 16 mA | 3 V | 0.4 | |||||
| IOL= 24 mA | TA = –40°C to 85°C | 0.55 | |||||
| TA = –40°C to 125°C | 0.65 | ||||||
| IOL= 32 mA | TA = –40°C to 85°C | 4.5 V | 0.55 | ||||
| TA = –40°C to 125°C | 0.65 | ||||||
| II | VI = 5.5 V or GND | 0 V to 5.5 V | ±1 | µA | |||
| IOZ | VO = 0 to 5.5 V | 3.6 V | ±5 | ||||
| Ioff | VI or VO = 5.5 V | 0 | ±10 | ||||
| ICC | VI = 5.5 V or GND, IO = 0 | 1.65 V to 5.5 V | 10 | ||||
| ΔICC | One input at VCC – 0.6 V, Other inputs at VCC or GND |
3 V to 5.5 V | 500 | ||||
| Ci | VI = VCC or GND | TA = –40°C to 85°C | 3.3 V | 3.5 | pF | ||
| Co | VO = VCC or GND | TA = –40°C to 85°C | 3.3 V | 6 | |||
(1) All typical values are at VCC = 3.3 V, TA = 25°C.
6.6 Timing Requirements: TA = –40°C to +85°C
over recommended operating free-air temperature range (unless otherwise noted) (see Figure 2)| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| tw | Pulse duration, LE high | 3 | ns | ||
| tsu | Setup time, data before LE↓ | VCC = 1.8 V ± 0.15 V | 2.4 | ||
| VCC = 2.5 V ± 0.2 V | 2 | ||||
| VCC = 3.3 V ± 0.3 V | 1.5 | ||||
| VCC = 5 V ± 0.5 V | 1.5 | ||||
| th | Hold time, data after LE↓ | VCC = 1.8 V ± 0.15 V | 2.5 | ||
| VCC = 2.5 V ± 0.2 V | 1.5 | ||||
| VCC = 3.3 V ± 0.3 V | 1.5 | ||||
| VCC = 5 V ± 0.5 V | 1.5 | ||||
6.7 Timing Requirements: TA = –40°C to +125°C
over recommended operating free-air temperature range (unless otherwise noted) (see Figure 2)| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| tw | Pulse duration, LE high | 3 | ns | ||
| tsu | Setup time, data before LE↓ | VCC = 1.8 V ± 0.15 V | 2.9 | ||
| VCC = 2.5 V ± 0.2 V | 2.1 | ||||
| VCC = 3.3 V ± 0.3 V | 1.5 | ||||
| VCC = 5 V ± 0.5 V | 1.5 | ||||
| th | Hold time, data after LE↓ | VCC = 1.8 V ± 0.15 V | 3 | ||
| VCC = 2.5 V ± 0.2 V | 1.5 | ||||
| VCC = 3.3 V ± 0.3 V | 1.5 | ||||
| VCC = 5 V ± 0.5 V | 1.5 | ||||
6.8 Switching Characteristics: TA = –40°C to +85°C
over recommended operating free-air temperature range, CL = 15 pF (unless otherwise noted) (see Figure 2)| PARAMETER | FROM (INPUT) |
TO (OUTPUT) |
TEST CONDITIONS | MIN | MAX | UNIT |
|---|---|---|---|---|---|---|
| tpd | D | Q | VCC = 1.8 V ± 0.15 V | 2 | 15 | ns |
| VCC = 2.5 V ± 0.2 V | 15 | 5 | ||||
| VCC = 3.3 V ± 0.3 V | 1 | 4 | ||||
| VCC = 5 V ± 0.5 V | 1 | 3.5 | ||||
| LE | VCC = 1.8 V ± 0.15 V | 2 | 15 | |||
| VCC = 2.5 V ± 0.2 V | 1.5 | 5 | ||||
| VCC = 3.3 V ± 0.3 V | 1 | 4 | ||||
| VCC = 5 V ± 0.5 V | 1 | 3.5 | ||||
| ten | OE | Q | VCC = 1.8 V ± 0.15 V | 2 | 12.5 | |
| VCC = 2.5 V ± 0.2 V | 1.5 | 4.5 | ||||
| VCC = 3.3 V ± 0.3 V | 1 | 4 | ||||
| VCC = 5 V ± 0.5 V | 1 | 2.5 | ||||
| tdis | OE | Q | VCC = 1.8 V ± 0.15 V | 2 | 14 | |
| VCC = 2.5 V ± 0.2 V | 1.5 | 7 | ||||
| VCC = 3.3 V ± 0.3 V | 1 | 7.9 | ||||
| VCC = 5 V ± 0.5 V | 1 | 5.3 |
6.9 Switching Characteristics: TA = –40°C to +85°C
over recommended operating free-air temperature range, CL = 30 pF or 50 pF (unless otherwise noted) (see Figure 3)| PARAMETER | FROM (INPUT) |
TO (OUTPUT) |
TEST CONDITIONS | MIN | MAX | UNIT |
|---|---|---|---|---|---|---|
| tpd | D | Q | VCC = 1.8 V ± 0.15 V | 2 | 16 | ns |
| VCC = 2.5 V ± 0.2 V | 1.5 | 7.3 | ||||
| VCC = 3.3 V ± 0.3 V | 1 | 5.4 | ||||
| VCC = 5 V ± 0.5 V | 1 | 4 | ||||
| LE | VCC = 1.8 V ± 0.15 V | 2 | 16.3 | |||
| VCC = 2.5 V ± 0.2 V | 1.5 | 7.4 | ||||
| VCC = 3.3 V ± 0.3 V | 1 | 5.5 | ||||
| VCC = 5 V ± 0.5 V | 1 | 4 | ||||
| ten | OE | Q | VCC = 1.8 V ± 0.15 V | 2 | 13 | |
| VCC = 2.5 V ± 0.2 V | 1.5 | 6.3 | ||||
| VCC = 3.3 V ± 0.3 V | 1 | 5.1 | ||||
| VCC = 5 V ± 0.5 V | 1 | 3.7 | ||||
| tdis | OE | Q | VCC = 1.8 V ± 0.15 V | 2 | 17.4 | |
| VCC = 2.5 V ± 0.2 V | 1 | 5.9 | ||||
| VCC = 3.3 V ± 0.3 V | 1 | 6.5 | ||||
| VCC = 5 V ± 0.5 V | 1 | 4.6 |
6.10 Switching Characteristics: TA = –40°C to +125°C
over recommended operating free-air temperature range, CL = 30 pF or 50 pF (unless otherwise noted) (see Figure 3)| PARAMETER | FROM (INPUT) |
TO (OUTPUT) |
TEST CONDITIONS | MIN | MAX | UNIT |
|---|---|---|---|---|---|---|
| tpd | D | Q | VCC = 1.8 V ± 0.15 V | 2 | 17 | ns |
| VCC = 2.5 V ± 0.2 V | 1.5 | 8 | ||||
| VCC = 3.3 V ± 0.3 V | 1 | 6 | ||||
| VCC = 5 V ± 0.5 V | 1 | 4.5 | ||||
| LE | VCC = 1.8 V ± 0.15 V | 2 | 17 | |||
| VCC = 2.5 V ± 0.2 V | 1.5 | 8 | ||||
| VCC = 3.3 V ± 0.3 V | 1 | 6 | ||||
| VCC = 5 V ± 0.5 V | 1 | 4.5 | ||||
| ten | OE | Q | VCC = 1.8 V ± 0.15 V | 2 | 13.5 | |
| VCC = 2.5 V ± 0.2 V | 1.5 | 7 | ||||
| VCC = 3.3 V ± 0.3 V | 1 | 5.5 | ||||
| VCC = 5 V ± 0.5 V | 1 | 4 | ||||
| tdis | OE | Q | VCC = 1.8 V ± 0.15 V | 2 | 18.4 | |
| VCC = 2.5 V ± 0.2 V | 1 | 6.2 | ||||
| VCC = 3.3 V ± 0.3 V | 1 | 6.8 | ||||
| VCC = 5 V ± 0.5 V | 1 | 5 | ||||
| ten | OE | Q | VCC = 1.8 V ± 0.15 V | 2 | 14 | |
| VCC = 2.5 V ± 0.2 V | 1.5 | 8.3 | ||||
| VCC = 3.3 V ± 0.3 V | 0.9 | 6.5 | ||||
| VCC = 5 V ± 0.5 V | 0.7 | 5.5 | ||||
| tdis | OE | Q | VCC = 1.8 V ± 0.15 V | 2 | 16 | |
| VCC = 2.5 V ± 0.2 V | 1.1 | 7.3 | ||||
| VCC = 3.3 V ± 0.3 V | 1.4 | 6 | ||||
| VCC = 5 V ± 0.5 V | 0.8 | 5.1 |
6.11 Operating Characteristics
TA = 25°C| PARAMETER | TEST CONDITIONS | TYP | UNIT | |||
|---|---|---|---|---|---|---|
| Cpd | Power dissipation capacitance | Outputs enabled | f = 10 MHz | VCC = 1.8 V | 19 | pF |
| VCC = 2.5 V | 19 | |||||
| VCC = 3.3 V | 19 | |||||
| VCC = 5 V | 20 | |||||
| Outputs disabled | VCC = 1.8 V | 3 | ||||
| VCC = 2.5 V | 3 | |||||
| VCC = 3.3 V | 3 | |||||
| VCC = 5 V | 4 | |||||
6.12 Typical Characteristics
