The power supply can be any voltage between the minimum and maximum supply voltage rating listed in the Section 5.3 table.

Each V_CC terminal should have a bypass capacitor to prevent power disturbance. A 0.1-μF bypass capacitor is recommended for devices with a single supply. If multiple pins are labeled V_CC, then a 0.01-μF or 0.022-μF capacitor is recommended for each V_CC because the V_CC pins are tied together internally. For devices with dual-supply pins operating at different voltages, for example V_CC and V_DD, a 0.1-μF bypass capacitor is recommended for each supply pin. Use multiple bypass capacitors in parallel to reject different frequencies of noise. Capacitors with values of 0.1 μF and 1 μF are commonly used in parallel. The bypass capacitor should be installed as close to the power terminal as possible for best results.