4 Revision History
Changes from Revision N (June 2023) to Revision O (July 2023)
- Changed pins 11 and 12 to NC in the NS Package Figure 5-2 and Table 5-2
Go
Changes from Revision M (February 2022) to Revision N (June 2023)
- 將“器件信息”表更改為封裝信息 表添加了 NS 封裝Go
- Added the SN65HVD3088E NS packageGo
- Added the NS package values to the
Thermal Information, SN65HVD308xE
tableGo
Changes from Revision L (November 2021) to Revision M (February 2022)
- Added storage temperature Tstg to Absolute Maximum
Ratings tableGo
- Changed the
Thermal Information, SN65HVD308xE
tableGo
Changes from Revision K (July 2021) to Revision L (November 2021)
- 刪除了特性:采用小型 MSOP-8 封裝Go
- 從標(biāo)題中刪除了“采用小型 MSOP-8 封裝”Go
- Changed the ψJT D package value from 78.8 to 8.8 in the
Thermal Information, SNx5HVD3082E
Go
Changes from Revision J (October 2017) to Revision K (July 2021)
- Changed the Thermal Information tablesGo
Changes from Revision I (September 2016) to Revision J (October 2017)
- Changed 3.3 V to 5 V on the VCC pin in Figure 9-4
Go
Changes from Revision H (August 2015) to Revision I (September 2016)
- 在
說明
中新增了文本。“SN65HVD3082E 的 D 封裝版本的特點是可在 –40°C 至 105°C的溫度范圍內(nèi)工作。”Go
- Changed the Operating free-air temperature for SN65HVD3082E (D package) From: MAX = 85°C To: 105°C in
Section 6.3
Go
Changes from Revision G (May 2009) to Revision H (August 2015)
- 新增了引腳配置和功能 部分、ESD 等級 表、特性說明 部分、器件功能模式、應(yīng)用和實施 部分、電源相關(guān)建議 部分、布局 部分、器件和文檔支持 部分以及機械、封裝和可訂購信息 部分Go
- 刪除了功耗額定值 表Go
- Deleted Package Thermal Information table Go
Changes from Revision F (March 2009) to Revision G (May 2009)
- Corrected unit value from Mv to °C per customer feedbackGo
- Added Graph - Driver Rise and Fall Time vs Temperature
Go
- Added IDLE Bus to the Function TableGo
- Added Receiver Fail-safe sectionGo