久久精品99无色码中文字幕,JLZZJLZZ亚洲乱熟无码,日韩美女一级久久久精品视频

ZHCS576I January 2011 – August 2021 LMZ14201H

PRODUCTION DATA

封裝選項

機械數據 (封裝 | 引腳)

NDW|7
- MMSF024

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

6.5 Electrical Characteristics

Minimum and maximum limits are ensured through test, design or statistical correlation. Typical values represent the most likely parametric norm at T_J = 25°C, and are provided for reference purposes only. Unless otherwise stated the following conditions apply: V_IN = 24 V, V_OUT = 12 V, R_ON = 249 k?

PARAMETER		TEST CONDITIONS	MIN⁽¹⁾	TYP⁽²⁾	MAX⁽¹⁾	UNIT
SYSTEM PARAMETERS
ENABLE CONTROL
V_EN	EN threshold trip point	V_EN rising, T_J = –40°C to 125°C	1.10	1.18	1.25	V
V_EN-HYS	EN threshold hysteresis			90		mV
SOFT-START
I_SS	SS source current	V_SS = 0 V, T_J = –40°C to 125°C	8	10	15	μA
I_SS-DIS	SS discharge current			–200		μA
CURRENT LIMIT
I_CL	Current limit threshold	DC average, T_J = –40°C to 125°C	1.5	1.95	2.7	A
VIN UVLO
VIN_UVLO	Input UVLO	EN pin floating V_IN rising		3.75		V
VIN_UVLO-HYST	Hysteresis	EN pin floating V_IN falling		130		mV
ON/OFF TIMER
t_ON-MIN	ON timer minimum pulse width			150		ns
t_OFF	OFF timer pulse width			260		ns
REGULATION AND OVERVOLTAGE COMPARATOR
V_FB	In-regulation feedback voltage	V_IN = 24 V, V_OUT = 12 V V_SS >+ 0.8 V T_J = –40°C to 125°C I_OUT = 10 mA to 1 A	0.782	0.803	0.822	V
V_FB	In-regulation feedback voltage	V_IN = 24 V, V_OUT = 12 V V_SS >+ 0.8 V T_J = 25°C I_OUT = 10 mA to 1 A	0.786	0.803	0.818	V
V_FB	In-regulation feedback voltage	V_IN = 36 V, V_OUT = 24 V V_SS >+ 0.8 V T_J = –40°C to 125°C I_OUT = 10 mA to 1 A	0.780	0.803	0.823	V
V_FB	In-regulation feedback voltage	V_IN = 36 V, V_OUT = 24 V V_SS >+ 0.8 V T_J = 25°C I_OUT = 10 mA to 1 A	0.787	0.803	0.819	V
V_FB-OVP	Feedback overvoltage protection threshold			0.92		V
I_FB	Feedback input bias current			5		nA
I_Q	Non-Switching Input Current	V_FB= 0.86 V		1		mA
I_SD	Shut Down Quiescent Current	V_EN= 0 V		25		μA
THERMAL CHARACTERISTICS
T_SD	Thermal shutdown (rising)				165	°C
T_SD-HYST	Thermal shutdown hysteresis				15	°C
PERFORMANCE PARAMETERS
ΔV_OUT	Output Voltage Ripple	V_OUT = 5 V, C_OUT = 100 μF 6.3 V X7R		8		mV_PP
ΔV_OUT/ΔV_IN	Line Regulation	V_IN = 16 V to 42 V, I_OUT= 1 A		0.01%
ΔV_OUT/ΔI_OUT	Load Regulation	V_IN = 24 V, I_OUT= 0 A to 1 A		1.5		mV/A
η	Efficiency	V_IN = 24 V, V_OUT = 12 V, I_OUT = 0.5 A		94%
η	Efficiency	V_IN = 24 V, V_OUT = 12 V, I_OUT = 1 A		92%

(1) Minimum and Maximum limits are 100% production tested at 25°C. Limits over the operating temperature range are ensured through correlation using Statistical Quality Control (SQC) methods. Limits are used to calculate Average Outgoing Quality Level (AOQL).

(2) Typical numbers are at 25°C and represent the most likely parametric norm.