人妻丰满熟妇AV无码区免,免费无码毛片一区二区三区A片,波多野结衣乳喷高潮视频

SNOS956E June 2001 – August 2014 LMH6654 , LMH6655

PRODUCTION DATA.

封裝選項

機械數據 (封裝 | 引腳)

D|8
- MSOI002K
DBV|5
- MPDS018T

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)⁽¹⁾

		MIN	MAX	UNIT
V_IN Differential			±1.2	V
Output Short Circuit Duration		See ⁽³⁾
Supply Voltage (V⁺ − V⁻)			13.2	V
Voltage at Input pins			V⁺ +0.5 V^- -0.5	V
Junction Temperature⁽⁴⁾			150	°C
Soldering Information	Infrared or Convection (20 sec.)		235	°C
Soldering Information	Wave Soldering (10 sec.)		260	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

6.2 Handling Ratings

			MIN	MAX	UNIT
T_stg	Storage temperature range		−65	150	°C
V_(ESD)	Electrostatic discharge⁽²⁾	Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins⁽¹⁾		2000	V
V_(ESD)	Electrostatic discharge⁽²⁾	Machine model (MM)⁽²⁾		200	V

(1) JEDEC document JEP155 states that 2000-V HBM allows safe manufacturing with a standard ESD control process.

(2) JEDEC document JEP157 states that 200-V MM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions⁽¹⁾

over operating free-air temperature range (unless otherwise noted)

		MIN	NOM	MAX	UNIT
Supply Voltage (V⁺ - V⁻)		±2.5		±6.0	V
Operating Temperature Range		−40		85	°C

6.4 Thermal Information

THERMAL METRIC⁽¹⁾		SOIC (D)	VSSOP (DGK)	SOT-23 (D)	UNIT
THERMAL METRIC⁽¹⁾		8 PINS	8 PINS	5 PINS	UNIT
R_θJA	Junction-to-ambient thermal resistance	172	235	265	°C/W

(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.

±5V Electrical Characteristics

Unless otherwise specified, all limits ensured for V⁺ = +5V, V⁻ = −5V, V_CM = 0V, A_V = +1, R_F = 25Ω for gain = +1, R_F = 402Ω for gain ≥ +2, and R_L = 100Ω. Boldface limits apply at the temperature extremes.

	PARAMETER	TEST CONDITIONS	MIN⁽⁶⁾	TYP⁽⁵⁾	MAX⁽⁶⁾	UNIT
DYNAMIC PERFORMANCE
f_CL	Close Loop Bandwidth	A_V = +1		250		MHz
		A_V = +2		130
		A_V = +5		52
		A_V = +10		26
GBWP	Gain Bandwidth Product	A_V ≥ +5		260		MHz
GBWP	Bandwidth for 0.1 dB Flatness	A_V +1		18		MHz
φm	Phase Margin			50		deg
SR	Slew Rate ⁽⁸⁾	A_V = +1, V_IN = 2 V_PP		200		V/µs
t_S	Settling Time 0.01%	A_V = +1, 2V Step		25		ns
t_S	0.1%	A_V = +1, 2V Step		15		ns
t_r	Rise Time	A_V = +1, 0.2V Step		1.4		ns
t_f	Fall Time	A_V = +1, 0.2V Step		1.2		ns
DISTORTION and NOISE RESPONSE
e_n	Input Referred Voltage Noise	f ≥ 0.1 MHz		4.5		nV/√Hz
i_n	Input-Referred Current Noise	f ≥ 0.1 MHz		1.7		pA/√Hz
	Second Harmonic Distortion	A_V = +1, f = 5 MHz		−80		dBc
	Third Harmonic Distortion	V_O = 2 V_PP, R_L = 100Ω		−85		dBc
X_t	Crosstalk (for LMH6655 only)	Input Referred, 5 MHz, Channel-to-Channel		−80		dB
DG	Differential Gain	A_V = +2, NTSC, R_L = 150Ω		0.01%
DP	Differential Phase	A_V = +2, NTSC, R_L = 150Ω		0.025		deg
INPUT CHARACTERISTICS
V_OS	Input Offset Voltage	V_CM = 0V	−3 −4	±1	3 4	mV
TC V_OS	Input Offset Average Drift	V_CM = 0V ⁽⁷⁾		6		µV/°C
I_B	Input Bias Current	V_CM = 0V		5	12 18	µA
I_OS	Input Offset Current	V_CM = 0V	−1 −2	0.3	1 2	µA
R_IN	Input Resistance	Common Mode		4		MΩ
R_IN	Input Resistance	Differential Mode		20		kΩ
C_IN	Input Capacitance	Common Mode		1.8		pF
C_IN	Input Capacitance	Differential Mode		1		pF
CMRR	Common Mode Rejection Ration	Input Referred, V_CM = 0V to −5V	70 68	90		dB
CMVR	Input Common- Mode Voltage Range	CMRR ≥ 50 dB		−5.15	−5.0	V
CMVR	Input Common- Mode Voltage Range	CMRR ≥ 50 dB	3.5	3.7		V
TRANSFER CHARACTERISTICS
A_VOL	Large Signal Voltage Gain	V_O = 4 V_PP, R_L = 100Ω	60 58	67		dB
OUTPUT CHARACTERISTICS
V_O	Output Swing High	No Load	3.4 3.2	3.6		V
	Output Swing Low	No Load		−3.9	−3.7 −3.5
	Output Swing High	R_L = 100Ω	3.2 3.0	3.4
	Output Swing Low	R_L = 100Ω		−3.6	−3.4 −3.2
I_SC	Short Circuit Current ⁽³⁾	Sourcing, V_O = 0V ΔV_IN = 200 mV	145 130	280		mA
I_SC	Short Circuit Current ⁽³⁾	Sinking, V_O = 0V ΔV_IN = 200 mV	100 80	185		mA
I_OUT	Output Current	Sourcing, V_O = +3V		80		mA
I_OUT	Output Current	Sinking, V_O = −3V		120		mA
R_O	Output Resistance	A_V = +1, f <100 kHz		0.08		Ω
POWER SUPPLY
PSRR	Power Supply Rejection Ratio	Input Referred, V_S = ±5V to ±6V	60	76		dB
I_S	Supply Current (per channel)			4.5	6 7	mA

5V Electrical Characteristics

Unless otherwise specified, all limits ensured for V⁺ = +5V, V⁻ = −0V, V_CM = 2.5V, A_V = +1, R_F = 25 Ω for gain = +1,
R_F = 402Ω for gain ≥ +2, and R_L = 100Ω to V⁺/2. Boldface limits apply at the temperature extremes.

	PARAMETER	TEST CONDITIONS	MIN⁽⁶⁾	TYP⁽⁵⁾	MAX⁽⁶⁾	UNIT
DYNAMIC PERFORMANCE
f_CL	Close Loop Bandwidth	A_V = +1		230		MHz
		A_V = +2		120
		A_V = +5		50
		A_V = +10		25
GBWP	Gain Bandwidth Product	A_V ≥ +5		250		MHz
	Bandwidth for 0.1 dB Flatness	A_V = +1		17		MHz
φm	Phase Margin			48		deg
SR	Slew Rate ⁽⁸⁾	A_V = +1, V_IN = 2 V_PP		190		V/µs
t_S	Settling Time 0.01%	A_V = +1, 2V Step		30		ns
t_S	0.1%	A_V = +1, 2V Step		20		ns
t_r	Rise Time	A_V = +1, 0.2V Step		1.5		ns
t_f	Fall Time	A_V = +1, 0.2V Step		1.35		ns
DISTORTION and NOISE RESPONSE
e_n	Input Referred Voltage Noise	f ≥ 0.1 MHz		4.5		nV/√Hz
i_n	Input Referred Current Noise	f ≥ 0.1 MHz		1.7		pA/√Hz
	Second Harmonic Distortion	A_V = +1, f = 5 MHz		−65		dBc
	Third Harmonic Distortion	V_O = 2 V_PP, R_L = 100Ω		−70		dBc
X_t	Crosstalk (for LMH6655 only)	Input Referred, 5 MHz		−78		dB
INPUT CHARACTERISTICS
V_OS	Input Offset Voltage	V_CM = 2.5V	−5 −6.5	±2	5 6.5	mV
TC V_OS	Input Offset Average Drift	V_CM = 2.5V ⁽⁷⁾		6		µV/°C
I_B	Input Bias Current	V_CM = 2.5V		6	12 18	µA
I_OS	Input Offset Current	V_CM = 2.5V	−2 −3	0.5	2 3	µA
R_IN	Input Resistance	Common Mode		4		MΩ
R_IN	Input Resistance	Differential Mode		20		kΩ
C_IN	Input Capacitance	Common Mode		1.8		pF
C_IN	Input Capacitance	Differential Mode		1		pF
CMRR	Common Mode Rejection Ration	Input Referred, V_CM = 0V to −2.5V	70 68	90		dB
CMVR	Input Common Mode Voltage Range	CMRR ≥ 50 dB		−0.15	0	V
CMVR	Input Common Mode Voltage Range	CMRR ≥ 50 dB	3.5	3.7		V
TRANSFER CHARACTERISTICS
A_VOL	Large Signal Voltage Gain	V_O = 1.6 V_PP, R_L = 100Ω	58 55	64		dB
OUTPUT CHARACTERISTICS
V_O	Output Swing High	No Load	3.6 3.4	3.75		V
	Output Swing Low	No Load		0.9	1.1 1.3
	Output Swing High	R_L = 100Ω	3.5 3.35	3.70
	Output Swing Low	R_L = 100Ω		1	1.3 1.45
I_SC	Short Circuit Current ⁽³⁾	Sourcing , V_O = 2.5V ΔV_IN = 200 mV	90 80	170		mA
I_SC	Short Circuit Current ⁽³⁾	Sinking, V_O = 2.5V ΔV_IN = 200 mV	70 60	140		mA
I_OUT	Output Current	Sourcing, V_O = +3.5V		30		mA
I_OUT	Output Current	Sinking, V_O = 1.5V		60		mA
R_O	Output Resistance	A_V = +1, f <100 kHz		.08		Ω
POWER SUPPLY
PSRR	Power Supply Rejection Ratio	Input Referred , V_S = ± 2.5V to ± 3V	60	75		dB
I_S	Supply Current (per channel)			4.5	6 7	mA

(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test conditions, see the Electrical Characteristics Table.

(2) Human body model, 1.5 kΩ in series with 100 pF. Machine model: 0Ω in series with 100 pF.

(3) Continuous short circuit operation at elevated ambient temperature can result in exceeding the maximum allowed junction temperature at 150°C.

(4) The maximum power dissipation is a function of T_J(MAX), R_θJA and T_A. The maximum allowable power dissipation at any ambient temperature is P_D = (T_J(MAX) − T_A)/R_θJA. All numbers apply for packages soldered directly onto a PC board.

(5) Typical Values represent the most likely parametric norm.

(6) All limits are specified by testing or statistical analysis.

(7) Offset voltage average drift is determined by dividing the change in V_OS at temperature extremes into the total temperature change.

(8) Slew rate is the slower of the rising and falling slew rates. Slew rate is rate of change from 10% to 90% of output voltage step.

6.5 Typical Characteristics

25°C, V⁺ = ±5 V, V⁻ = −5, R_F = 25 Ω for gain = +1, R_F = 402 Ω for gain ≥ +2 and R_L = 100 Ω, unless otherwise specified.

Figure 1. Closed Loop Bandwidth (G = +1)

Figure 3. Closed Loop Bandwidth (G = +5)

Figure 5. Supply Current per Channel
vs. Supply Voltage

Figure 7. Offset Voltage
vs. Supply Voltage (V_CM = 0V)

Figure 9. Offset Voltage
vs. Common Mode

Figure 11. Bias Current
vs. Common Mode Voltage

Figure 13. A_OL, PSRR and CMRR
vs. Temperature

Figure 15. Inverting Large Signal Pulse Response
(V_S = ±5V)

Figure 17. Non-Inverting Large Signal Pulse Response
(V_S = ±5V)

Figure 19. Non-Inverting Small Signal Pulse Response
(V_S = ±5V)

Figure 21. Inverting Small Signal Pulse Response
(V_S = ±5V)

Figure 23. Input Voltage and Current Noise
vs. Frequency (V_S = ±5V)

Figure 25. Harmonic Distortion
vs. Frequency
G = +1, V_O = 2 V_PP, V_S = ±5V

Figure 27. Harmonic Distortion
vs. Temperature
V_S = ±5V, f = 5 MHz, V_O = 2 V_PP

Figure 29. Harmonic Distortion
vs. Gain
V_S = ±5V, f = 5 MHz, V_O = 2 V_PP

Figure 31. Harmonic Distortion
vs. Output Swing
(G = +2, V_S = ±5V, f = 5 MHz)

Figure 33. CMRR vs. Frequency

Figure 35. Output Sourcing Current

Figure 37. CrossTalk
vs. Frequency (LMH6655 only)

Figure 39. Open Loop Gain and Phase
vs. Frequency

Figure 2. Closed Loop Bandwidth (G = +2)

Figure 4. Closed Loop Bandwidth (G = +10)

Figure 6. Supply Current per Channel
vs. Temperature

Figure 8. Offset Voltage
vs. Common Mode

Figure 10. Bias Current and Offset Voltage
vs. Temperature

Figure 12. Bias Current
vs. Common Mode Voltage

Figure 14. Inverting Large Signal Pulse Response
(V_S = 5V)

Figure 16. Non-Inverting Large Signal Pulse Response
(V_S = 5V)

Figure 18. Non-Inverting Small Signal Pulse Response
(V_S = 5V)

Figure 20. Inverting Small Signal Pulse Response
(V_S = 5V)

Figure 22. Input Voltage and Current Noise
vs. Frequency (V_S = 5V)

Figure 24. Harmonic Distortion
vs. Frequency
G = +1, V_O = 2 V_PP, V_S = 5V

Figure 26. Harmonic Distortion
vs. Temperature
V_S = 5V, f = 5 MHz, V_O = 2 V_PP

Figure 28. Harmonic Distortion
vs. Gain
V_S = 5V, f = 5 MHz, V_O = 2 V_PP

Figure 30. Harmonic Distortion
vs. Output Swing
(G = +2, V_S = 5V, f = 5 MHz)

Figure 32. PSRR vs. Frequency

Figure 34. Output Sinking Current

Figure 36. CrossTalk
vs. Frequency (LMH6655 only)

Figure 38. Isolation Resistance
vs. Capacitive Load