ZHCSLW2C September 2021 – April 2022 ISOW7740 , ISOW7741 , ISOW7742 , ISOW7743 , ISOW7744
PRODUCTION DATA
- 1 特性
- 2 應用
- 3 說明
- 4 Revision History
- 5 說明（接續）
- 6 Pin Configuration and Functions
-
7 Specifications
- 7.1 Absolute Maximum Ratings
- 7.2 ESD Ratings
- 7.3 Recommended Operating Conditions
- 7.4 Thermal Information
- 7.5 Power Ratings
- 7.6 Insulation Specifications
- 7.7 Safety-Related Certifications
- 7.8 Safety Limiting Values
- 7.9 Electrical Characteristics - Power Converter
- 7.10 Supply Current Characteristics - Power Converter
- 7.11 Electrical Characteristics Channel Isolator - VIO, VISOIN = 5-V
- 7.12 Supply Current Characteristics Channel Isolator - VIO, VISOIN = 5-V
- 7.13 Electrical Characteristics Channel Isolator - VIO, VISOIN = 3.3-V
- 7.14 Supply Current Characteristics Channel Isolator - VIO, VISOIN = 3.3-V
- 7.15 Electrical Characteristics Channel Isolator - VIO, VISOIN = 2.5-V
- 7.16 Supply Current Characteristics Channel Isolator - VIO, VISOIN = 2.5-V
- 7.17 Electrical Characteristics Channel Isolator - VIO, VISOIN = 1.8-V
- 7.18 Supply Current Characteristics Channel Isolator - VIO, VISOIN = 1.8-V
- 7.19 Switching Characteristics - 5-V Supply
- 7.20 Switching Characteristics - 3.3-V Supply
- 7.21 Switching Characteristics - 2.5-V Supply
- 7.22 Switching Characteristics - 1.8-V Supply
- 7.23 Insulation Characteristics Curves
- 7.24 Typical Characteristics
- 8 Parameter Measurement Information
- 9 Detailed Description
- 10Application and Implementation
- 11Power Supply Recommendations
- 12Layout
- 13Device and Documentation Support
- 14Mechanical, Packaging, and Orderable Information
封裝選項
機械數據 (封裝 | 引腳)
- DFM|20
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
10.2.4 Insulation Lifetime
Insulation lifetime projection data is collected by using industry-standard Time Dependent Dielectric Breakdown (TDDB) test method. In this test, all pins on each side of the barrier are tied together creating a two-terminal device and high voltage applied between the two sides; See Figure 10-4 for TDDB test setup. The insulation breakdown data is collected at various high voltages switching at 60 Hz over temperature. For reinforced insulation, VDE standard requires the use of TDDB projection line with failure rate of less than 1 part per million (ppm). Even though the expected minimum insulation lifetime is 20 years at the specified working isolation voltage, VDE reinforced certification requires additional safety margin of 20% for working voltage and 87.5% for lifetime which translates into minimum required insulation lifetime of 37.5 years at a working voltage that's 20% higher than the specified value.
Figure 10-5 shows the intrinsic capability of the isolation barrier to withstand high voltage stress over its lifetime. Based on the TDDB data, the intrinsic capability of the insulation is 1000 VRMS with a lifetime of 1184 years.
Figure 10-4 Test Setup for Insulation Lifetime Measurement
Figure 10-5 Insulation Lifetime Projection
Data