日韩少妇人妻VS中文字幕,成人做爰A片免费看网站找不到了,99久久国产综合精品女图图等你

ZHCSI83C may 2018 – may 2023 ADC12DL3200

PRODUCTION DATA

封裝選項

機械數據 (封裝 | 引腳)

ACF|256
- MPBGAO1C
ALJ|256
- MPBGAS8B

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

6.7 Electrical Characteristics: AC Specifications (Dual-Channel Mode)

typical values at T_A = +25°C, nominal supply voltages, default full-scale voltage (FS_RANGE_A = FS_RANGE_B = 0xA000), f_IN = 248 MHz, A_IN = –1 dBFS, f_CLK = maximum rated clock frequency, filtered 1-V_PP-DIFF sine-wave clock, DES_EN = 1, LDEMUX = 1, LALIGNED = 0, ADC_DITH = 0x01, LVDS driver high-swing mode (HSM), background calibration (unless otherwise noted); minimum and maximum values are at nominal supply voltages and over operating free-air temperature range provided in the Recommended Operating Conditions table

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
FPBW	Full-power input bandwidth (–3 dB)⁽¹⁾	Foreground calibration		8.0		GHz
FPBW	Full-power input bandwidth (–3 dB)⁽¹⁾	Background calibration		8.0		GHz
XTALK	Channel-to-channel crosstalk	Aggressor = 400 MHz, –1 dBFS		–91		dB
		Aggressor = 3000 MHz, –1 dBFS		–59
		Aggressor = 6000 MHz, –1 dBFS		–59
CER	Code error rate	Maximum CER		10^-18		errors/ sample
NSD	Noise spectral density, no input signal	Maximum full-scale voltage (FS_RANGE_A = FS_RANGE_B = 0xFFFF) setting, foreground calibration		–151.1		dBFS/Hz
NSD	Noise spectral density, no input signal	Default full-scale voltage (FS_RANGE_A = FS_RANGE_B = 0xA000) setting, foreground calibration		–149.8		dBFS/Hz
NF	Noise figure	Maximum full-scale voltage (FS_RANGE_A = FS_RANGE_B = 0xFFFF) setting, foreground calibration, no input, Z_S = 100 ?		21.9		dB
NF	Noise figure	Default full-scale voltage (FS_RANGE_A = FS_RANGE_B = 0xA000) setting, foreground calibration, no input, Z_S = 100 ?		23.2		dB
NOISE_DC	DC input noise standard deviation	No input, foreground calibration, excludes DC offset, includes fixed interleaving spur (F_S/2 spur)		2.9		LSB
SNR	Signal-to-noise ratio, large signal, excluding DC, HD2 to HD9 and interleaving spurs	f_IN = 347 MHz, A_IN = –1 dBFS		57.1		dBFS
		f_IN = 347 MHz, A_IN = –1 dBFS, maximum FS_RANGE_A and FS_RANGE_B setting, foreground calibration		57.8
		f_IN = 997 MHz, A_IN = –1 dBFS		56.9
		f_IN = 2482 MHz, A_IN = –1 dBFS	52	55.6
		f_IN = 2482 MHz, A_IN = –1 dBFS, maximum FS_RANGE_A and FS_RANGE_B setting, foreground calibration		56.3
		f_IN = 4997 MHz, A_IN = –1 dBFS		52.8
		f_IN = 6397 MHz, A_IN = –1 dBFS		51.2
		f_IN = 8197 MHz, A_IN = –1 dBFS		49.7
SNR	Signal-to-noise ratio, small signal, excluding DC, HD2 to HD9 and interleaving spurs	f_IN = 347 MHz, AIN = –16 dBFS		57.7		dBFS
		f_IN = 997 MHz, A_IN = –16 dBFS		57.7
		f_IN = 2482 MHz, A_IN = –16 dBFS		57.7
		f_IN = 4997 MHz, A_IN = –16 dBFS		57.4
		f_IN = 6397 MHz, A_IN = –16 dBFS		57.1
		f_IN = 8197 MHz, A_IN = –16 dBFS		57.0
SINAD	Signal-to-noise and distortion ratio, large signal, excluding DC and F_S/2 fixed spurs	f_IN = 347 MHz, AIN = –1 dBFS		56.2		dBFS
		f_IN = 997 MHz, AIN = –1 dBFS		55.1
		f_IN = 2482 MHz, AIN = –1 dBFS	50	53.7
		f_IN = 4997 MHz, AIN = –1 dBFS		50.0
		f_IN = 6397 MHz, AIN = –1 dBFS		47.9
		f_IN = 8197 MHz, AIN = –1 dBFS		46.5
ENOB	Effective number of bits, large signal, excluding DC and F_S/2 fixed spurs	f_IN = 347 MHz, A_IN = –1 dBFS		9.0		bits
		f_IN = 997 MHz, A_IN = –1 dBFS		8.9
		f_IN = 2482 MHz, A_IN = –1 dBFS	8.0	8.6
		f_IN = 4997 MHz, A_IN = –1 dBFS		8.0
		f_IN = 6397 MHz, A_IN = –1 dBFS		7.7
		f_IN = 8197 MHz, A_IN = –1 dBFS		7.4
SFDR	Spurious-free dynamic range, large signal, excluding DC and F_S/2 fixed spurs	f_IN = 347 MHz, A_IN = –1 dBFS		70		dBFS
		f_IN = 347 MHz, A_IN = –1 dBFS, maximum FS_RANGE_A and FS_RANGE_B setting, foreground calibration		69
		f_IN = 997 MHz, A_IN = –1 dBFS		66
		f_IN = 2482 MHz, A_IN = –1 dBFS	56	64
		f_IN = 2482 MHz, A_IN = –1 dBFS, maximum FS_RANGE_A and FS_RANGE_B setting, foreground calibration		61
		f_IN = 4997 MHz, A_IN = –1 dBFS		57
		f_IN = 6397 MHz, A_IN = –1 dBFS		56
		f_IN = 8197 MHz, A_IN = –1 dBFS		53
SFDR	Spurious-free dynamic range, small signal, excluding DC and F_S/2 fixed spurs	f_IN = 347 MHz, A_IN = –16 dBFS		78		dBFS
		f_IN = 997 MHz, A_IN = –16 dBFS		77
		f_IN = 2482 MHz, A_IN = –16 dBFS		75
		f_IN = 4997 MHz, A_IN = –16 dBFS		75
		f_IN = 6397 MHz, A_IN = –16 dBFS		78
		f_IN = 8197 MHz, A_IN = –16 dBFS		78
F_S/2	F_S/2 fixed interleaving spur, independent of input signal	No input		–76	–55	dBFS
HD2	2^nd-order harmonic	f_IN = 347 MHz, A_IN = –1 dBFS		–72		dBFS
		f_IN = 347 MHz, A_IN = –1 dBFS, maximum FS_RANGE_A and FS_RANGE_B setting, foreground calibration		–73
		f_IN = 997 MHz, A_IN = –1 dBFS		–68
		f_IN = 2482 MHz, A_IN = –1 dBFS		–65	–56
		f_IN = 2482 MHz, A_IN = –1 dBFS, maximum FS_RANGE_A and FS_RANGE_B setting, foreground calibration		–63
		f_IN = 4997 MHz, A_IN = –1 dBFS		–65
		f_IN = 6397 MHz, A_IN = –1 dBFS		–59
		f_IN = 8197 MHz, A_IN = –1 dBFS		–65
HD3	3^rd-order harmonic	f_IN = 347 MHz, A_IN = –1 dBFS		–74		dBFS
		f_IN = 347 MHz, A_IN = –1 dBFS, maximum FS_RANGE_A and FS_RANGE_B setting, foreground calibration		–71
		f_IN = 997 MHz, A_IN = –1 dBFS		–69
		f_IN = 2482 MHz, A_IN = –1 dBFS		–65	–56
		f_IN = 2482 MHz, A_IN = –1 dBFS, maximum FS_RANGE_A and FS_RANGE_B setting, foreground calibration		–61
		f_IN = 4997 MHz, A_IN = –1 dBFS		–57
		f_IN = 6397 MHz, A_IN = –1 dBFS		–56
		f_IN = 8197 MHz, A_IN = –1 dBFS		–53
F_S/2-F_IN	F_S/2-F_IN interleaving spur, signal dependent	f_IN = 347 MHz, A_IN = –1 dBFS		–73		dBFS
		f_IN = 997 MHz, A_IN = –1 dBFS		–73
		f_IN = 2482 MHz, A_IN = –1 dBFS		–74	–56
		f_IN = 4997 MHz, A_IN = –1 dBFS		–73
		f_IN = 6397 MHz, A_IN = –1 dBFS		–72
		f_IN = 8197 MHz, A_IN = –1 dBFS		–66
SPUR	Worst harmonic 4^th-order or higher	f_IN = 347 MHz, A_IN = –1 dBFS		–74		dBFS
		f_IN = 997 MHz, A_IN = –1 dBFS		–72
		f_IN = 2482 MHz, A_IN = –1 dBFS		–74	–60
		f_IN = 4997 MHz, A_IN = –1 dBFS		–73
		f_IN = 6397 MHz, A_IN = –1 dBFS		–72
		f_IN = 8197 MHz, A_IN = –1 dBFS		–70
IMD3	3^rd-order intermodulation	f_IN = 347 MHz ± 5 MHz, A_IN = –7 dBFS per tone		–81		dBFS
		f_IN = 997 MHz ± 5 MHz, A_IN = –7 dBFS per tone		–87
		f_IN = 2482 MHz ± 5 MHz, A_IN = –7 dBFS per tone		–72
		f_IN = 4997 MHz ± 5 MHz, A_IN = –7 dBFS per tone		–61
		f_IN = 6397 MHz ± 5 MHz, A_IN = –7 dBFS per tone		–53
		f_IN = 8197 MHz ± 5 MHz, A_IN = –7 dBFS per tone		–45

(1) Full-power input bandwidth (FPBW) is defined as the input frequency where the reconstructed output of the ADC has dropped 3 dB below the power of a full-scale input signal at a low input frequency. Useable bandwidth may exceed the –3-dB full-power input bandwidth.