TPS60150
- 2.7-V to 5.5-V Input Voltage Range
- Fixed Output Voltage of 5 V
- Maximum Output Current: 140 mA
- 1.5-MHz Switching Frequency
- Typical 90-μA Quiescent Current at No Load
Condition (Skip Mode) - X2 Charge Pump
- Hardware Enable and Disable Function
- Built-in Soft Start
- Built-in Undervoltage Lockout Protection
- Thermal and Overcurrent Protection
- Available in a 2-mm × 2-mm 6-Pin SON Package
with 0.8-mm Height
The TPS60150 device is a switched capacitor voltage converter that produces a regulated, low noise, and low-ripple output voltage of 5 V from an unregulated input voltage.
The 5-V output can supply a minimum of 140-mA current.
The TPS60150 device operates in skip mode when the load current falls less than 8 mA under typical condition. In skip mode operation, quiescent current is reduced to 90 µA.
Only 3 external capacitors are needed to generate the output voltage, therefore saving PCB space.
Inrush current is limited by the soft-start function during power on and power transient states.
The TPS60150 device operates over a free-air temperature range of –40°C to 85°C. The device is available with a small 2-mm × 2-mm 6-pin SON package (QFN).
技術文檔
| 類型 | 標題 | 下載最新的英語版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 數據表 | TPS60150 5-V, 140-mA Charge-Pump 數據表 (Rev. C) | PDF | HTML | 2015年 10月 29日 | ||
| 應用手冊 | QFN 和 SON PCB 連接 (Rev. C) | PDF | HTML | 英語版 (Rev.C) | PDF | HTML | 2024年 1月 5日 | |
| 應用手冊 | Performing Accurate PFM Mode Efficiency Measurements (Rev. A) | 2018年 12月 11日 | ||||
| 選擇指南 | 電源管理指南 2018 (Rev. K) | 2018年 7月 31日 | ||||
| 選擇指南 | 電源管理指南 2018 (Rev. R) | 2018年 6月 25日 | ||||
| 應用手冊 | Extending the Soft Start Time Without a Soft Start Pin (Rev. B) | 2017年 6月 15日 | ||||
| 技術文章 | How to overcome automotive front-end design challenges | PDF | HTML | 2015年 9月 10日 | |||
| 用戶指南 | TPS60150EVM-359 User's Guide (Rev. C) | 2010年 7月 2日 |
設計和開發
如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。
PMP10652 — 適用于 30W ADAS 系統的系統級參考設計(具備汽車應用所需的全套保護功能)
此設計具有各種保護措施,如通過 TVS 的負載突降(ISO 脈沖測試)、反向電壓(具有極低 Iq 的創新智能二極管)、具有 OVP 保護的電池斷路開關 (PFET),并經過 EMI 優化可滿足 CISPR25 3 類(總體)傳導 EMI 限制和高達 30MHz 范圍的 5 類要求。
輸入電壓范圍介于 4.5V 至 30V(OVP 為 20V),因此可在冷啟動情況下工作。
LM74610 用于電池反向保護,利用電荷泵驅動一個 N 通道 FET (...)
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| WSON (DRV) | 6 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。