SNAS689A October   2017  – July 2019 LMK04228

PRODUCTION DATA.  

1. 1 Features
2. 2 Applications
3. 3 Description
   1.     Simplified Schematic
4. 4 Revision History
5. 5 Device Comparison Table
6. 6 Pin Configuration and Functions
   1.     Pin Functions
7. 7 Specifications
   1. 7.1 Absolute Maximum Ratings
   2. 7.2 ESD Ratings
   3. 7.3 Recommended Operating Conditions
   4. 7.4 Thermal Information
   5. 7.5 Electrical Characteristics
   6. 7.6 SPI Interface Timing
   7. 7.7 Timing Diagram
8. 8 Parameter Measurement Information
   1. 8.1 Charge Pump Current Specification Definitions
      1. 8.1.1 Charge Pump Output Current Magnitude Variation vs. Charge Pump Output Voltage
      2. 8.1.2 Charge Pump Sink Current vs. Charge Pump Output Source Current Mismatch
      3. 8.1.3 Charge Pump Output Current Magnitude Variation vs. Ambient Temperature
   2. 8.2 Differential Voltage Measurement Terminology
9. 9 Detailed Description
   1. 9.1 Overview
      1. 9.1.1 Jitter Cleaning
      2. 9.1.2 JEDEC JESD204B Support
      3. 9.1.3 Three PLL1 Redundant Reference Inputs (CLKin0/CLKin0*, CLKin1/CLKin1*, and CLKin2/CLKin2*)
      4. 9.1.4 VCXO- and Crystal-Buffered Output
      5. 9.1.5 Frequency Holdover
      6. 9.1.6 PLL2 Integrated Loop Filter Poles
      7. 9.1.7 Internal VCOs
      8. 9.1.8 Clock Distribution
         1. 9.1.8.1 Device Clock Divider
         2. 9.1.8.2 SYSREF Clock Divider
         3. 9.1.8.3 Device Clock Delay
         4. 9.1.8.4 SYSREF Delay
         5. 9.1.8.5 Programmable Output Formats
         6. 9.1.8.6 Clock Output Synchronization
      9. 9.1.9 Status Pins
   2. 9.2 Functional Block Diagrams
   3. 9.3 Feature Description
      1. 9.3.1 SYNC/SYSREF
      2. 9.3.2 JEDEC JESD204B
         1. 9.3.2.1 How to Enable SYSREF
            1. 9.3.2.1.1 Setup of SYSREF Example
            2. 9.3.2.1.2 SYSREF_CLR
         2. 9.3.2.2 SYSREF Modes
            1. 9.3.2.2.1 SYSREF Pulser
            2. 9.3.2.2.2 Continuous SYSREF
            3. 9.3.2.2.3 SYSREF Request
      3. 9.3.3 Digital Delay
         1. 9.3.3.1 Fixed Digital Delay
            1. 9.3.3.1.1 Fixed Digital Delay Example
      4. 9.3.4 SYSREF to Device Clock Alignment
      5. 9.3.5 Input Clock Switching
         1. 9.3.5.1 Input Clock Switching - Manual Mode
         2. 9.3.5.2 Input Clock Switching - Pin Select Mode
            1. 9.3.5.2.1 Configuring Pin Select Mode
         3. 9.3.5.3 Input Clock Switching - Automatic Mode
            1. 9.3.5.3.1 Starting Active Clock
      6. 9.3.6 Digital Lock Detect
         1. 9.3.6.1 Calculating Digital Lock Detect Frequency Accuracy
      7. 9.3.7 Holdover
         1. 9.3.7.1 Enable Holdover
            1. 9.3.7.1.1 Fixed (Manual) CPout1 Holdover Mode
            2. 9.3.7.1.2 Tracked CPout1 Holdover Mode
         2. 9.3.7.2 During Holdover
         3. 9.3.7.3 Exiting Holdover
         4. 9.3.7.4 Holdover Frequency Accuracy and DAC Performance
         5. 9.3.7.5 Holdover Mode - Automatic Exit of Holdover
   4. 9.4 Programming
      1. 9.4.1 Recommended Programming Sequence
         1. 9.4.1.1 SPI LOCK
         2. 9.4.1.2 SYSREF_CLR
   5. 9.5 Register Maps
      1. 9.5.1 Register Map for Device Programming
      2. 9.5.2 Device Register Descriptions
         1. 9.5.2.1 System Functions
            1. 9.5.2.1.1 RESET, SPI_3WIRE_DIS
            2. 9.5.2.1.2 POWERDOWN
            3. 9.5.2.1.3 ID_DEVICE_TYPE
            4. 9.5.2.1.4 ID_PROD[15:8], ID_PROD
            5. 9.5.2.1.5 ID_MASKREV
            6. 9.5.2.1.6 ID_VNDR[15:8], ID_VNDR
         2. 9.5.2.2 (0x100 - 0x138) Device Clock and SYSREF Clock Output Controls
            1. 9.5.2.2.1 CLKoutX_Y_ODL, CLKoutX_Y_IDL, DCLKoutX_DIV
            2. 9.5.2.2.2 DCLKoutX_DDLY_CNTH, DCLKoutX_DDLY_CNTL
            3. 9.5.2.2.3 DCLKoutX_ADLY, DCLKoutX_ADLY_MUX, DCLKout_MUX
            4. 9.5.2.2.4 DCLKoutX_HS, SDCLKoutY_MUX, SDCLKoutY_DDLY, SDCLKoutY_HS
            5. 9.5.2.2.5 SDCLKoutY_ADLY_EN, SDCLKoutY_ADLY
            6. 9.5.2.2.6 DCLKoutX_DDLY_PD, DCLKout_ADLY_PD, DCLKoutX_Y_PD, SDCLKoutY_DIS_MODE, SDCLKoutY_PD
            7. 9.5.2.2.7 SDCLKoutY_POL, SDCLKoutY_FMT, DCLKoutX_POL, DCLKoutX_FMT
         3. 9.5.2.3 SYSREF, SYNC, and Device Config
            1. 9.5.2.3.1 VCO_MUX, OSCout_FMT
            2. 9.5.2.3.2 SYSREF_CLKin0_MUX, SYSREF_MUX
            3. 9.5.2.3.3 SYSREF_DIV[12:8], SYSREF_DIV[7:0]
            4. 9.5.2.3.4 SYSREF_DDLY[12:8], SYSREF_DDLY[7:0]
            5. 9.5.2.3.5 SYSREF_PULSE_CNT
            6. 9.5.2.3.6 PLL1_PD, VCO_LDO_PD, VCO_PD, OSCin_PD, SYSREF_GBL_PD, SYSREF_PD, SYSREF_DDLY_PD, SYSREF_PLSR_PD
            7. 9.5.2.3.7 SYSREF_CLR, SYNC_1SHOT_EN, SYNC_POL, SYNC_EN, SYNC_PLL2_DLD, SYNC_PLL1_DLD, SYNC_MODE
            8. 9.5.2.3.8 SYNC_DISSYSREF, SYNC_DISX
            9. 9.5.2.3.9 Fixed Register
         4. 9.5.2.4 (0x146 - 0x149) CLKin Control
            1. 9.5.2.4.1 CLKin2_EN, CLKin1_EN, CLKin0_EN, CLKin2_TYPE, CLKin1_TYPE, CLKin0_TYPE
            2. 9.5.2.4.2 CLKin_SEL_POL, CLKin_SEL_MODE, CLKin1_OUT_MUX, CLKin0_OUT_MUX
            3. 9.5.2.4.3 CLKin_SEL0_MUX, CLKin_SEL0_TYPE
            4. 9.5.2.4.4 SDIO_RDBK_TYPE, CLKin_SEL1_MUX, CLKin_SEL1_TYPE
         5. 9.5.2.5 RESET_MUX, RESET_TYPE
         6. 9.5.2.6 (0x14B - 0x152) Holdover
            1. 9.5.2.6.1 LOS_TIMEOUT, LOS_EN, TRACK_EN, HOLDOVER_FORCE, MAN_DAC_EN, MAN_DAC[9:8]
            2. 9.5.2.6.2 MAN_DAC[9:8], MAN_DAC[7:0]
            3. 9.5.2.6.3 DAC_TRIP_LOW
            4. 9.5.2.6.4 DAC_CLK_MULT, DAC_TRIP_HIGH
            5. 9.5.2.6.5 DAC_CLK_CNTR
            6. 9.5.2.6.6 CLKin_OVERRIDE, HOLDOVER_PLL1_DET, HOLDOVER_LOS_DET, HOLDOVER_VTUNE_DET, HOLDOVER_HITLESS_SWITCH, HOLDOVER_EN
            7. 9.5.2.6.7 HOLDOVER_DLD_CNT[13:8], HOLDOVER_DLD_CNT[7:0]
         7. 9.5.2.7 (0x153 - 0x15F) PLL1 Configuration
            1. 9.5.2.7.1 CLKin0_R[9:8], CLKin0_R[7:0]
            2. 9.5.2.7.2 CLKin1_R[9:8], CLKin1_R[7:0]
            3. 9.5.2.7.3 CLKin2_R[9:8], CLKin2_R[7:0]
            4. 9.5.2.7.4 PLL1_N
            5. 9.5.2.7.5 PLL1_WND_SIZE, PLL1_CP_TRI, PLL1_CP_POL, PLL1_CP_GAIN
            6. 9.5.2.7.6 PLL1_DLD_CNT[13:8], PLL1_DLD_CNT[7:0]
            7. 9.5.2.7.7 PLL1_LD_MUX, PLL1_LD_TYPE
         8. 9.5.2.8 (0x160 - 0x16E) PLL2 Configuration
            1. 9.5.2.8.1 PLL2_R[4:0]
            2. 9.5.2.8.2 PLL2_P, OSCin_FREQ, PLL2_XTAL_EN, PLL2_REF_2X_EN
            3. 9.5.2.8.3 PLL2_FCAL_DIS
            4. 9.5.2.8.4 PLL2_N
            5. 9.5.2.8.5 PLL2_WND_SIZE, PLL2_CP_GAIN, PLL2_CP_POL, PLL2_CP_TRI
            6. 9.5.2.8.6 SYSREF_REQ_EN, PLL2_DLD_CNT
            7. 9.5.2.8.7 PLL2_LF_R4, PLL2_LF_R3
            8. 9.5.2.8.8 PLL2_LF_C4, PLL2_LF_C3
            9. 9.5.2.8.9 PLL2_LD_MUX, PLL2_LD_TYPE
         9. 9.5.2.9 (0x16F - 0x1FFF) Misc Registers
            1. 9.5.2.9.1  Fixed Register
            2. 9.5.2.9.2  Fixed Register
            3. 9.5.2.9.3  PLL2_PRE_PD, PLL2_PD
            4. 9.5.2.9.4  OPT_REG_1
            5. 9.5.2.9.5  OPT_REG_2
            6. 9.5.2.9.6  RB_PLL1_LD_LOST, RB_PLL1_LD, CLR_PLL1_LD_LOST
            7. 9.5.2.9.7  RB_PLL2_LD_LOST, RB_PLL2_LD, CLR_PLL2_LD_LOST
            8. 9.5.2.9.8  RB_DAC_VALUE(MSB), RB_CLKinX_SEL, RB_CLKinX_LOS
            9. 9.5.2.9.9  RB_DAC_VALUE
            10. 9.5.2.9.10 RB_HOLDOVER
            11. 9.5.2.9.11 SPI_LOCK
10. 10Application and Implementation
    1. 10.1 Application Information
       1. 10.1.1 Digital Lock Detect Frequency Accuracy
          1. 10.1.1.1 Minimum Lock Time Calculation Example
       2. 10.1.2 Driving CLKin AND OSCin Inputs
          1. 10.1.2.1 Driving CLKin PINS With a Differential Source
          2. 10.1.2.2 Driving CLKin Pins With a Single-Ended Source
    2. 10.2 Typical Application
       1. 10.2.1 Design Requirements
       2. 10.2.2 Detailed Design Procedure
          1. 10.2.2.1 Device Programming
    3. 10.3 Do's and Don'ts
       1. 10.3.1 Pin Connection Recommendations
11. 11Power Supply Recommendations
    1. 11.1 Current Consumption / Power Dissipation Calculations
12. 12Layout
    1. 12.1 Layout Guidelines
       1. 12.1.1 Thermal Management
    2. 12.2 Layout Example
13. 13Device and Documentation Support
    1. 13.1 Device Support
       1. 13.1.1 TICS Pro
    2. 13.2 Community Resources
    3. 13.3 Trademarks
    4. 13.4 Electrostatic Discharge Caution
    5. 13.5 Glossary
14. 14Mechanical, Packaging, and Orderable Information