SLVAF11 June 2021 TPS51397A , TPS566231 , TPS566235 , TPS566238 , TPS568230
3.2 Phase Margin Estimation Method
A phase margin estimation method is proposed in this section to help evaluating the components chosen with the method in previous section.
Based on the phase characteristics of poles and zeros, it can be derived that the phase of double poles, ripple injection zero, ESR zero and delay factor are as Equation 16 through Equation 19 at crossover frequency.
For D-CAP control schemes, the initial phase before double poles frequency is about 180 degree. Then we can calculate the phase margin:
If the components chosen can’t ensure enough phase margin with Equation 20, it’s recommended to recheck the calculated limits and reselect the capacitance. Basically, if the estimated crossover frequency is closer to 1/3 of crossover frequency, select larger capacitance. Otherwise select smaller capacitance.
The application design method and evaluation method above are only the reference for output capacitance choose. It needs to be verified with bench test due to the effects of parasitic parameters and some non-ideal situation.