4 Pin Failure Mode Analysis (Pin FMA)

This section provides a failure mode analysis (FMA) for the pins of the TPS7B84-Q1 (VSON and SOT223 packages). The failure modes covered in this document include the typical pin-by-pin failure scenarios:

• Pin short-circuited to ground (see Table 4-2 and Table 4-6)
• Pin open-circuited (see Table 4-3 and Table 4-7)
• Pin short-circuited to an adjacent pin (see Table 4-4 and Table 4-8)
• Pin short-circuited to supply (see Table 4-5 and Table 4-9)

Table 4-2 through Table 4-9 also indicate how these pin conditions can affect the device as per the failure effects classification in Table 4-1.

Following are the assumptions of use and the device configuration assumed for the pin FMA in this section:

• Device contains the 8-Pin VSON or the 4-Pin SOT-223 pin configurations.
• Device operates at free-air temperatures between -40°C and 150°C.
• Device operates at an input voltage less than 40V and output current less than 150mA.
• Device operates according to all recommended operating conditions and does not exceed the absolute maximum ratings.