ZHCSEM1C December 2015 – September 2025 UCC27211A-Q1
PRODUCTION DATA
| 參數 | 測試條件 | 最小值 | 典型值 | 最大值 | 單位 | |
|---|---|---|---|---|---|---|
| 電源電流 | ||||||
| IDD | VDD 靜態電流 | VLI = VHI = 0V | 0.11 | 0.19 | mA | |
| IDDO | VDD 工作電流 | f = 500kHz，CLOAD = 0 | 1.4 | 3 | mA | |
| IHB | 啟動電壓靜態電流 | VLI = VHI = 0V | 0.065 | 0.12 | mA | |
| IHBO | 啟動電壓工作電流 | f = 500kHz，CLOAD = 0 | 1.3 | 3 | mA | |
| IHBS | HB 至 VSS 靜態電流 | VHS = VHB = 105V | 0.0005 | 1 | μA | |
| IHBSO | HB 至 VSS 工作電流 | f = 500kHz，CLOAD = 0 | 0.03 | 1 | mA | |
| 輸入 | ||||||
| VHIT_HI | 輸入電壓高電平閾值 | 1.7 | 2.3 | 2.55 | V | |
| VHIT_LI | 輸入電壓高電平閾值 | 1.7 | 2.3 | 2.55 | V | |
| VLIT_HI | 輸入電壓低電平閾值 | 1.2 | 1.6 | 1.9 | V | |
| VLIT_LI | 輸入電壓低電平閾值 | 1.2 | 1.6 | 1.9 | V | |
| VIHYS HI | 輸入電壓遲滯 | 0.7 | V | |||
| VIHYS LI | 輸入電壓遲滯 | 0.7 | V | |||
| RIN_HI | 輸入下拉電阻 | VIN = 3V | 68 | k? | ||
| RIN_LI | 輸入下拉電阻 | VIN = 3V | 68 | k? | ||
| 欠壓保護 (UVLO) | ||||||
| VDDR | VDD 上升閾值 | 6.2 | 7 | 7.8 | V | |
| VDDHYS | VDD 閾值遲滯 | 0.5 | V | |||
| VHBR | VHB 上升閾值 | 5.6 | 6.7 | 7.9 | V | |
| VHBHYS | VHB 閾值遲滯 | 1.1 | V | |||
| 自舉二極管 | ||||||
| VF | 低電流正向電壓 | IVDD-HB = 100μA | 0.65 | 0.85 | V | |
| VFI | 高電流正向電壓 | IVDD-HB = 100mA | 0.9 | 1.05 | V | |
| RD | 動態電阻，ΔVF/ΔI | IVDD-HB = 160mA 和 180mA | 0.3 | 0.55 | 0.85 | ? |
| LO 柵極驅動器 | ||||||
| VLOL | 低電平輸出電壓 | ILO = 100mA | 0.07 | 0.19 | V | |
| VLOH | 高電平輸出電壓 | ILO = -100mA，VLOH = VDD – VLO | 0.11 | 0.29 | V | |
| 峰值上拉電流(1) | VLO = 0V | 3.7 | A | |||
| 峰值下拉電流(1) | VLO = 12V | 4.5 | A | |||
| HO 柵極驅動器 | ||||||
| VHOL | 低電平輸出電壓 | IHO = 100mA | 0.07 | 0.19 | V | |
| VHOH | 高電平輸出電壓 | IHO = –100mA，VHOH = VHB- VHO | 0.11 | 0.29 | V | |
| 峰值上拉電流(1) | VHO = 0V | 3.7 | A | |||
| 峰值下拉電流(1) | VHO = 12V | 4.5 | A | |||