SCES707C August 2008 – December 2016 TS5A12301E
PRODUCTION DATA.
- 1 Features
- 2 Applications
- 3 Description
- 4 Revision History
- 5 Pin Configuration and Functions
- 6 Specifications
- 7 Parameter Measurement Information
- 8 Detailed Description
- 9 Application and Implementation
- 10Power Supply Recommendations
- 11Layout
- 12Device and Documentation Support
- 13Mechanical, Packaging, and Orderable Information
封裝選項
機械數據 (封裝 | 引腳)
- YFP|6
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)(1)(2)| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| VCC | Supply voltage(3) | –0.5 | 6.5 | V | |
| VNC, VNO, VCOM |
Analog voltage(3)(4) | –0.5 | VCC + 0.5 | V | |
| IIK | Analog port diode current | VCC < VNC, VNO, VCOM, or VNC, VNO, VCOM < 0 |
–50 | 50 | mA |
| VIN | Digital input voltage(3)(5) | –0.5 | 6.5 | V | |
| IIK | Digital input clamp current | VI < 0 | –50 | mA | |
| ICC,
IGND |
Continuous current through VCC or GND | –100 | 100 | mA | |
| Tstg | Storage temperature | –65 | 150 | °C | |
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The algebraic convention (whereby the most negative value is a minimum and the most positive value is a maximum)
(3) All voltages are with respect to ground (unless otherwise specified).
(4) This value is limited to 5.5 V maximum.
(5) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
6.2 ESD Ratings
| VALUE | UNIT | |||
|---|---|---|---|---|
| V(ESD) | Electrostatic discharge | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) | ±8000 | V |
| Charged-device model (CDM), per JEDEC specification JESD22-C101(2) | ±8000 | |||
| Contact discharge (IEC 61000-4-2) | 8000 | |||
| Air-gap discharge (IEC 61000-4-2) | 15000 | |||
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| VCC | Supply voltage | 2.25 | 5.5 | V | |
| VNC, VNO, VCOM |
Analog voltage | 0 | VCC | V | |
| VIN | Digital input voltage | 0 | 5.5 | V | |
| INC, INO, ICOM |
On-state switch current | VNC, VNO, VCOM = 0 to VCC | –450 | 450 | mA |
| On-state peak switch current(1) | VNC, VNO, VCOM = 0 to VCC | –700 | 700 | ||
| TA | Operating temperature | –40 | 85 | °C | |
(1) Pulse at 1-ms duration < 10% duty cycle
6.4 Thermal Information
| THERMAL METRIC(1) | TS5A12301E | UNIT | |
|---|---|---|---|
| YFP (DSBGA) | |||
| 6 PINS | |||
| RθJA | Junction-to-ambient thermal resistance(2) | 123.4 | °C/W |
| RθJC(top) | Junction-to-case (top) thermal resistance | 1.9 | °C/W |
| RθJB | Junction-to-board thermal resistance | 37.6 | °C/W |
| ψJT | Junction-to-top characterization parameter | 0.4 | °C/W |
| ψJB | Junction-to-board characterization parameter | 37.7 | °C/W |
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report.
(2) The package thermal impedance is calculated in accordance with JESD 51-7.
6.5 Electrical Characteristics – 5-V Supply
VCC = 4.5 V to 5.5 V and TA = –40°C to 85°C (unless otherwise noted)(1)| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||||
|---|---|---|---|---|---|---|---|---|---|
| ANALOG SWITCH | |||||||||
| ron | ON-state resistance | VNO or VNC = 2.5 V, ICOM = –100 mA, and VCC = 4.5 V (see Figure 12) | TA = 25°C | 0.5 | 0.75 | Ω | |||
| TA = –40°C to 85°C | 0.8 | ||||||||
| Δron | ON-state resistance match between channels | VNO or VNC = 2.5 V, ICOM = –100 mA, and VCC = 4.5 V (see Figure 12) | TA = 25°C | 0.05 | 0.1 | Ω | |||
| TA = –40°C to 85°C | 0.1 | ||||||||
| ron(flat) | ON-state resistance flatness | 0 ≤ (VNO or VNC) ≤ VCC, ICOM = –100 mA, VCC = 4.5 V, and TA = 25°C (see Figure 12) |
0.15 | Ω | |||||
| VNO or VNC = 1 V, 1.5 V, 2.5 V, ICOM = –100 mA, and VCC = 4.5 V (see Figure 12) |
TA = 25°C | 0.1 | 0.2 | ||||||
| TA = –40°C to 85°C | 0.25 | ||||||||
| INO(OFF), INC (OFF) |
NO and NC OFF leakage current | VNO = 1 V, 4.5 V, VCOM = 4.5 V, 1 V, VNC = open, or VNO = 1 V, 4.5 V, VCOM = 4.5 V, 1 V, VNO = open, and VCC = 5.5 V (see Figure 13) |
TA = 25°C | –20 | 2 | 20 | nA | ||
| TA = –40°C to 85°C | –100 | 100 | |||||||
| INO(PWROFF), INC (PWROFF) |
NO and NC PWROFF leakage current | VNO or VNC = 0 V to 5.5 V, VCOM = 5.5 V to 0 V, and VCC = 0 V (see Figure 13) | TA = 25°C | –10 | 10 | µA | |||
| TA = –40°C to 85°C | –10 | 10 | |||||||
| INO(ON) | NC and NO ON leakage current | VNO = 1 V, 4.5 V, VCOM, VNC = open, or VNC = 1 V, 4.5 V, VCOM, VNO = open, and VCC = 5.5 V (see Figure 14) |
TA = 25°C | –20 | 2 | 20 | nA | ||
| TA = –40°C to 85°C | –200 | 200 | |||||||
| ICOM(ON) | COM ON leakage current | VCOM = 1 V, 4.5 V, VNO and VNC = open, or VCOM = 1 V, 4.5 V, VNO or VNC = open, and VCC = 5.5 V (see Figure 14) |
TA = 25°C | –20 | 2 | 20 | nA | ||
| TA = –40°C to 85°C | –200 | 200 | |||||||
| ICOM(PWROFF) | COM OFF leakage current | VNO or VNC = 0 V to 5.5 V, VCOM = 5.5 V to 0 V, and VCC = 0 V (see Figure 13) | TA = 25°C | –10 | 10 | µA | |||
| TA = –40°C to 85°C | –10 | 10 | |||||||
| DIGITAL CONTROL INPUT (IN) | |||||||||
| VIH | Input logic high | VCC = 5.5 V and TA = –40°C to 85°C | 1.05 | 5.5 | V | ||||
| VIL | Input logic low | VCC = 5.5 V and TA = –40°C to 85°C | 0 | 0.65 | V | ||||
| IIH, IIL |
Input leakage current | VIN = 1.95 V or 0 V, VCC = 5.5 V, and TA = –40°C to 85°C | –0.05 | 0.5 | µA | ||||
| rIN | Input resistance | VIN = 1.95 V, VCC = 5.5 V, and TA = –40°C to 85°C | 6 | MΩ | |||||
| DYNAMIC | |||||||||
| tON | Turnon time | VCOM = VCC, RL = 50 Ω, CL= 35 pF (see Figure 16) |
VCC = 5 V and TA = 25°C |
110 | 225 | ns | |||
| VCC = 4.5 V and TA = –40°C to 85°C |
250 | ||||||||
| tOFF | Turnoff time | VCOM = VCC, RL = 50 Ω, CL = 35 pF (see Figure 16) |
VCC = 5 V and TA = 25°C |
100 | 215 | ns | |||
| VCC = 4.5 V and TA = –40°C to 85°C |
225 | ||||||||
| tBBM | Break-before-make time | VCOM = VCC, RL = 50 Ω, CL = 35 pF (see Figure 17) |
VCC = 5 V and TA = 25°C |
1 | 10 | 15 | ns | ||
| VCC = 4.5 V and TA = –40°C to 85°C |
1 | 20 | |||||||
| QC | Charge injection | VGEN = 0, RGEN = 0, CL = 1 nF, VCC = 5 V, and TA = 25°C (see Figure 21) |
97 | pC | |||||
| CNO(OFF) | NO OFF capacitance | VNC or VNO = VCC or GND, switch OFF, VCC = 5 V, and TA = 25°C (see Figure 15) |
28 | pF | |||||
| CNC(ON), CNO(ON) |
NC and NO ON capacitance | VNC or VNO = VCC or GND, switch ON, VCC = 5 V, and TA = 25°C (see Figure 15) |
112 | pF | |||||
| CCOM(ON) | COM ON capacitance | VCOM = VCC or GND, switch ON, VCC = 5 V, and TA = 25°C (see Figure 15) | 112 | pF | |||||
| CI | Digital input capacitance | VIN = VCC or GND, and TA = 25°C (see Figure 15) | 3 | pF | |||||
| BW | Bandwidth | RL = 50 Ω, switch ON, VCC = 5 V, and TA = 25°C (see Figure 18) |
55 | MHz | |||||
| OISO | OFF isolation | RL = 50 Ω, f = 1 MHz, VCC = 5 V, and TA = 25°C (see Figure 19) |
–63 | dB | |||||
| XTALK | Crosstalk | RL = 50 Ω, f = 1 MHz, VCC = 5 V, and TA = 25°C (see Figure 20) |
–63 | dB | |||||
| THD | Total harmonic distortion | RL = 600 Ω, CL = 50 pF, f = 20 Hz to 20 kHz, VCC = 5 V, and TA = 25°C (see Figure 22) |
0.003% | ||||||
| SUPPLY | |||||||||
| ICC | Positive supply current | VIN = VCC or GND, VCC = 5.5 V, and TA = –40°C to 85°C | 10 | µA | |||||
(1) The algebraic convention (whereby the most negative value is a minimum and the most positive value is a maximum)
6.6 Electrical Characteristics – 3.3-V Supply
VCC = 3 V to 3.6 V and TA = –40°C to 85°C (unless otherwise noted)(1)| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||||
|---|---|---|---|---|---|---|---|---|---|
| ANALOG SWITCH | |||||||||
| ron | ON-state resistance | VNO or VNC = 2 V, ICOM = –100 mA, switch ON, and VCC = 3 V (see Figure 12) | TA = 25°C | 0.75 | 0.9 | Ω | |||
| TA = –40°C to 85°C | 1.2 | ||||||||
| Δron | ON-state resistance match between channels | VNO or VNC = 2 V, 0.8 V, ICOM = –100 mA, switch ON, and VCC = 3 V (see Figure 12) |
TA = 25°C | 0.1 | 0.15 | Ω | |||
| TA = –40°C to 85°C | 0.15 | ||||||||
| ron(flat) | ON-state resistance flatness | 0 ≤ (VNO or VNC) ≤ VCC, ICOM = –100 mA, switch ON, VCC = 3 V, and TA = 25°C (see Figure 12) |
0.2 | Ω | |||||
| VNO or VNC = 0.8 V, 2 V, ICOM = –100 mA, switch ON, and VCC = 3 V (see Figure 12) |
TA = 25°C | 0.1 | 0.2 | ||||||
| TA = –40°C to 85°C | 0.3 | ||||||||
| INO(OFF), INC (OFF) |
NO and NC OFF leakage current | VNO = 1 V, 3 V, VCOM = 3 V, 1 V, VNC = open, or VNC = 1 V, 3 V, VCOM = 3 V, 1 V, VNO = open, switch OFF, and VCC = 3.6 V (see Figure 13) |
TA = 25°C | –20 | 2 | 20 | nA | ||
| TA = –40°C to 85°C | –50 | 50 | |||||||
| INO(PWROFF), INC (PWROFF) |
NO and NC PWROFF leakage current | VNO or VNC = 0 V to 3.6 V, VCOM = 3.6 V to 0 V, switch OFF, and VCC = 0 V (see Figure 13) |
TA = 25°C | –10 | 10 | µA | |||
| TA = –40°C to 85°C | –10 | 10 | |||||||
| INO(ON) | NC and NO ON leakage current | VNO = 1 V, 3 V, VNC and VCOM = open, or VNC = 1 V, 3 V, VNO and VCOM = open, switch ON, and VCC = 3.6 V (see Figure 14) |
TA = 25°C | –20 | 2 | 20 | nA | ||
| TA = –40°C to 85°C | –100 | 100 | |||||||
| ICOM(ON) | COM ON leakage current | VCOM = 1 V, VNO and VNC = open, or VCOM = 3 V, VNO and VNC = open, and VCC = 3.6 V (see Figure 14) | TA = 25°C | –20 | 2 | 20 | nA | ||
| TA = –40°C to 85°C | –100 | 100 | |||||||
| ICOM(PWROFF) | COM OFF leakage current | VNO or VNC = 0 V to 3.6 V, VCOM = 3.6 V to 0 V, and VCC = 0 V (see Figure 13) | TA = 25°C | –10 | 10 | µA | |||
| TA = –40°C to 85°C | –10 | 10 | |||||||
| DIGITAL CONTROL INPUT (IN) | |||||||||
| VIH | Input logic high | VCC = 3.6 V and TA = –40°C to 85°C | 1.05 | 5.5 | V | ||||
| VIL | Input logic low | VCC = 3.6 V and TA = –40°C to 85°C | 0 | 0.65 | V | ||||
| IIH, IIL |
Input leakage current | VI = 1.95 V or 0 V, VCC = 3.6 V, and TA = –40°C to 85°C | –0.05 | 0.5 | µA | ||||
| rIN | Input resistance | VI = 1.95 V, VCC = 3.6 V, and TA = –40°C to 85°C | 6 | MΩ | |||||
| DYNAMIC | |||||||||
| tON | Turnon time | VCOM = VCC, RL = 50 Ω, CL= 35 pF (see Figure 16) |
VCC = 3.3 V and TA = 25°C |
72 | 175 | ns | |||
| VCC = 3 V and TA = –40°C to 85°C |
185 | ||||||||
| tOFF | Turnoff time | VCOM = VCC, RL = 50 Ω, CL = 35 pF (see Figure 16) |
VCC = 3.3 V and TA = 25°C |
105 | 165 | ns | |||
| VCC = 3 V and TA = –40°C to 85°C |
170 | ||||||||
| tBBM | Break-before-make time | VCOM = VCC, RL = 50 Ω, CL = 35 pF, (see Figure 17) |
VCC = 3.3 V and TA = 25°C |
1 | 16 | 30 | ns | ||
| VCC = 3 V and TA = –40°C to 85°C |
1 | 35 | |||||||
| QC | Charge injection | VGEN = 0, RGEN = 0, CL = 1 nF (see Figure 21) |
VCC = 3.3 V and TA = 25°C |
97 | pC | ||||
| CNO(OFF) | NO OFF capacitance | VNO = VCC or GND, switch OFF, VCC = 3.3 V, and TA = 25°C (see Figure 15) | 28 | pF | |||||
| CNC(ON), CNO(ON) |
NC and NO ON capacitance | VNC or VNO = VCC or GND, switch ON, VCC = 3.3 V, and TA = 25°C (see Figure 15) |
115 | pF | |||||
| CCOM(ON) | COM ON capacitance | VCOM = VCC or GND, switch ON, VCC = 3.3 V, and TA = 25°C (see Figure 15) | 115 | pF | |||||
| CI | Digital input capacitance | VIN = VCC or GND, VCC = 3.3 V, and TA = 25°C (see Figure 15) |
3 | pF | |||||
| BW | Bandwidth | RL = 50 Ω, switch ON, VCC = 3.3 V, and TA = 25°C (see Figure 18) |
54 | MHz | |||||
| OISO | OFF isolation | RL = 50 Ω, f = 1 MHz, VCC = 3.3 V, and TA = 25°C (see Figure 19) |
–63 | dB | |||||
| XTALK | Crosstalk | RL = 50 Ω, f = 1 MHz, VCC = 3.3 V, and TA = 25°C (see Figure 20) |
–63 | dB | |||||
| THD | Total harmonic distortion | RL = 600 Ω, CL = 50 pF, f = 20 Hz to 20 kHz, VCC = 3.3 V, and TA = 25°C (see Figure 22) | 0.004% | ||||||
| SUPPLY | |||||||||
| ICC | Positive supply current | VIN = 1.95 V or GND, VCC = 3.6 V, and TA = 25°C | 10 | µA | |||||
(1) The algebraic convention (whereby the most negative value is a minimum and the most positive value is a maximum)
6.7 Electrical Characteristics – 2.5-V Supply
VCC = 2.25 V to 2.75 V and TA = –40°C to 85°C (unless otherwise noted)(1)| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||||
|---|---|---|---|---|---|---|---|---|---|
| ANALOG SWITCH | |||||||||
| ron | ON-state resistance | VNO or VNC = 1.8 V, ICOM = –100 mA, switch ON, and VCC = 2.25 V (see Figure 12) |
TA = 25°C | 1.1 | 1.3 | Ω | |||
| TA = –40°C to 85°C | 1.6 | ||||||||
| Δron | ON-state resistance match between channels | VNO or VNC = 1.8 V, 0.8 V, ICOM = –100 mA, switch ON, and VCC = 2.25 V (see Figure 12) |
TA = 25°C | 0.15 | 0.2 | Ω | |||
| TA = –40°C to 85°C | 0.2 | ||||||||
| ron(flat) | ON-state resistance flatness | 0 ≤ (VNO or VNC) ≤ VCC, ICOM = –100 mA, switch ON, VCC = 2.25 V, and TA = 25°C (see Figure 12) |
0.4 | Ω | |||||
| VNO or VNC = 0.8 V, 1 V, 1.8 V, ICOM = –100 mA, switch ON, and VCC = 2.25 V (see Figure 12) |
TA = 25°C | 0.25 | 0.5 | ||||||
| TA = –40°C to 85°C | 0.6 | ||||||||
| INO(OFF), INC (OFF) |
NO and NC OFF leakage current | VNO = 0.5 V, 2.2 V, VCOM = 2.2 V, 0.5 V, VNC = open, or VNC = 0.5 V, 2.2 V, VCOM = 2.2 V, 0.5 V, VNO = open, switch OFF, and VCC = 2.75 V (see Figure 13) |
TA = 25°C | –20 | 2 | 20 | nA | ||
| TA = –40°C to 85°C | –50 | 50 | |||||||
| INO(PWROFF), INC (PWROFF) |
NO and NC PWROFF leakage current | VNO or VNC = 0 V to 2.75 V, VCOM = 2.75 V to 0 V, switch OFF, and VCC = 0 V (see Figure 13) |
TA = 25°C | –10 | 10 | µA | |||
| TA = –40°C to 85°C | –10 | 10 | |||||||
| INO(ON) | NC and NO ON leakage current | VNO = 0.5 V, 2.2 V, VNC and VCOM = open, or VNC = 2.2 V, 0.5 V, VNO and VCOM = open, switch ON, and VCC = 2.75 V (see Figure 14) |
TA = 25°C | –20 | 2 | 20 | nA | ||
| TA = –40°C to 85°C | –100 | 100 | |||||||
| ICOM(ON) | COM ON leakage current | VCOM = 0.5 V, VNO and VNC = open, or VCOM = 2.2 V, VNO and VNC = open, switch ON, and VCC = 2.75 V (see Figure 14) |
TA = 25°C | –20 | 2 | 20 | nA | ||
| TA = –40°C to 85°C | –100 | 100 | |||||||
| ICOM(PWROFF) | COM OFF leakage current | VNO or VNC = 0 V to 2.75 V, VCOM = 2.75 V to 0 V, and VCC = 0 V (see Figure 13) | TA = 25°C | –10 | 10 | µA | |||
| TA = –40°C to 85°C | –10 | 10 | |||||||
| DIGITAL CONTROL INPUT (IN) | |||||||||
| VIH | Input logic high | VCC = 2.75 V and TA = –40°C to 85°C | 1.05 | 5.5 | V | ||||
| VIL | Input logic low | VCC = 2.75 V and TA = –40°C to 85°C | 0 | 0.65 | V | ||||
| IIH, IIL |
Input leakage current | VIN = 1.95 V or 0, VCC = 2.75 V, and TA = –40°C to 85°C | –0.05 | 0.5 | µA | ||||
| rIN | Input resistance | VIN = 1.95 V, VCC = 2.75 V, and TA = –40°C to 85°C | 6 | MΩ | |||||
| DYNAMIC | |||||||||
| tON | Turnon time | VCOM = VCC, RL = 50 Ω, and CL= 35 pF (see Figure 16) | VCC = 2.5 V and TA = 25°C |
97 | 170 | ns | |||
| VCC = 2.25 V and TA = –40°C to 85°C |
175 | ||||||||
| tOFF | Turnoff time | VCOM = VCC, RL = 50 Ω, and CL = 35 pF (see Figure 16) | VCC = 2.5 V and TA = 25°C |
80 | 155 | ns | |||
| VCC = 2.25 V and TA = –40°C to 85°C |
160 | ||||||||
| tBBM | Break-before-make time | VCOM = VCC , RL = 50 Ω, and CL = 35 pF (see Figure 17) | VCC = 2.5 V and TA = 25°C |
5 | 18 | 35 | ns | ||
| VCC = 2.25 V and TA = –40°C to 85°C |
5 | 40 | |||||||
| QC | Charge injection | VGEN = 0, RGEN = 0, CL = 1 nF, VCC = 2.5 V, and TA = 25°C (see Figure 21) | 82 | pC | |||||
| CNO(OFF) | NO OFF capacitance | VNO = VCC or GND, switch OFF, VCC = 2.5 V, and TA = 25°C (see Figure 15) | 29 | pF | |||||
| CNC(ON), CNO(ON) |
NC and NO ON capacitance | VNC or VNO = VCC or GND, switch ON, VCC = 2.5 V, and TA = 25°C (see Figure 15) |
116 | pF | |||||
| CCOM(ON) | COM ON capacitance | VCOM = VCC or GND, switch ON, VCC = 2.5 V, and TA = 25°C (see Figure 15) | 116 | pF | |||||
| CI | Digital input capacitance | VIN = VCC or GND, VCC = 2.5 V, and TA = 25°C (see Figure 15) |
3 | pF | |||||
| BW | Bandwidth | RL = 50 Ω, switch ON, VCC = 2.5 V, and TA = 25°C (see Figure 18) |
54 | MHz | |||||
| OISO | OFF isolation | RL = 50 Ω, f = 1 MHz, VCC = 2.5 V, and TA = 25°C (see Figure 19) |
–63 | dB | |||||
| XTALK | Crosstalk | RL = 50 Ω, f = 1 MHz, VCC = 2.5 V, and TA = 25°C (see Figure 20) |
–63 | dB | |||||
| THD | Total harmonic distortion | RL = 600 Ω, CL = 50 pF, VCC = 2.5 V, f = 20 Hz to 20 kHz, and TA = 25°C (see Figure 22) | 0.008% | ||||||
| SUPPLY | |||||||||
| ICC | Positive supply current | VIN = 1.95 V or GND, VCC = 2.75 V, and TA = –40°C to 85°C | 10 | µA | |||||
(1) The algebraic convention (whereby the most negative value is a minimum and the most positive value is a maximum)
6.8 Typical Characteristics
(VCC = 2.25 V)
Figure 1. ron vs VCOM
(VCC = 4.5 V)
Figure 3. ron vs VCOM
Figure 5. tON/tOFF vs Supply Voltage
Figure 7. Charge Injection (QC) vs VCOM
Figure 9. OFF Isolation vs Frequency
Figure 11. Total Harmonic Distortion (THD) vs Frequency
(VCC = 3 V)
Figure 2. ron vs VCOM
(TA = 25°C)
Figure 4. ICC vs VCC
Figure 6. tON/tOFF vs Temperature
Figure 8. Gain vs Frequency
Figure 10. Crosstalk vs Frequency