ZHCSQI1A November 2022 – November 2023 TPS92622-Q1
PRODUCTION DATA
- 1
- 1 特性
- 2 應用
- 3 說明
- 4 Pin Configuration and Functions
- 5 Specifications
-
6 Detailed Description
- 6.1 Overview
- 6.2 Functional Block Diagram
- 6.3
Feature Description
- 6.3.1 Power Supply (SUPPLY)
- 6.3.2 Enable and Shutdow(EN)
- 6.3.3 Constant-Current Output and Setting (INx)
- 6.3.4 Thermal Sharing Resistor (OUTx and RESx)
- 6.3.5 PWM Control (PWMx)
- 6.3.6 Supply Control
- 6.3.7 Diagnostics
- 6.3.8 FAULT Bus Output With One-Fails-All-Fail
- 6.3.9 FAULT Table
- 6.3.10 LED Fault Summary
- 6.3.11 IO Pins Inner Connection
- 6.4 Device Functional Modes
- 7 Application and Implementation
- 8 Device and Documentation Support
- 9 Revision History
- 10Mechanical, Packaging, and Orderable Information
封裝選項
機械數據 (封裝 | 引腳)
散熱焊盤機械數據 (封裝 | 引腳)
- DRR|12
訂購信息
6.3.7.3 LED Open-Circuit Detection Enable (DIAGEN)
The TPS92622-Q1 device supports the DIAGEN pin with an accurate threshold to disable the LED open-circuit. The DIAGEN pin can be used to enable or disable LED open-circuit detection based on SUPPLY pin voltage sensed by an external resistor divider as illustrated in Figure 6-5. When the voltage applied on DIAGEN pin is higher than the threshold VIH(DIAGEN), the device enables LED open-circuit detection. When V(DIAGEN) is lower than the threshold VIL(DIAGEN), the device disables LED open-circuit detection.
Only LED open-circuit detection can be disabled by pulling down the DIAGEN pin. The LED short-to-GND detection and overtemperature protection cannot be turned off by pulling down the DIAGEN pin. Use Equation 3 to calculate the SUPPLY threshold voltage.
Figure 6-5 Application Schematic For
DIAGEN
where
- VIL(DIAGEN) = 1.045 V (minimum)