国产日韩高清av在线不卡,久久精品国产99国产精品,国产AV一级闺蜜

ZHCS137F March 2011 – October 2017 TPS54622

PRODUCTION DATA.

封裝選項

機械數據 (封裝 | 引腳)

RHL|14
- MPQF252H

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

6.5 Electrical Characteristics

T_J = –40°C to 150°C, VIN = 4.5 V to 17 V, PVIN = 1.6 V to 17 V (unless otherwise noted)

PARAMETER	TEST CONDITIONS	MIN	TYP	MAX	UNIT
SUPPLY VOLTAGE (VIN AND PVIN PINS)
PVIN operating input voltage		1.6		17	V
VIN operating input voltage		4.5		17	V
VIN internal UVLO threshold	VIN rising		4	4.5	V
VIN internal UVLO hysteresis			150		mV
VIN shutdown supply Current	EN = 0 V		2	5	μA
VIN operating – non switching supply current	VSENSE = 810 mV		600	800	μA
ENABLE AND UVLO (EN PIN)
Enable threshold	Rising		1.21	1.26	V
Enable threshold	Falling	1.1	1.17
Input current	EN = 1.1 V		1.15		μA
Hysteresis current	EN = 1.3 V		3.3		μA
VOLTAGE REFERENCE
Voltage reference	0 A ≤ I_OUT ≤ 6 A	0.594	0.6	0.606	V
MOSFET
High-side switch resistance	BOOT-PH = 3 V		32	60	mΩ
High-side switch resistance⁽¹⁾	BOOT-PH = 6 V		26	40	mΩ
Low-side switch resistance⁽¹⁾	VIN = 12 V		19	30	mΩ
ERROR AMPLIFIER
Error amplifier transconductance (gm)	–2 μA < I_COMP < 2 μA, V_(COMP) = 1 V		1300		μMhos
Error amplifier dc gain	VSENSE = 0.6 V	1000	3100		V/V
Error amplifier source/sink	V_(COMP) = 1 V, 100 mV input overdrive		±110		μA
Start switching threshold			0.25		V
COMP to Iswitch gm			16		A/V
CURRENT LIMIT
High-side switch current limit threshold		8	11	14	A
Low-side switch sourcing current limit		6.5	10	15	A
Low-side switch sinking current limit		2	3	4	A
Hiccup wait time			512		Cycles
Hiccup time before re-start			16384		Cycles
THERMAL SHUTDOWN
Thermal shutdown		160	175		°C
Thermal shutdown hysteresis			10		°C
Thermal shutdown hiccup time			16384		Cycles
TIMING RESISTOR AND EXTERNAL CLOCK (RT/CLK PIN)
Minimum switching frequency	Rrt = 240 kΩ (1%)	160	200	240	kHz
Switching frequency	Rrt = 100 kΩ (1%)	400	480	560	kHz
Maximum switching frequency	Rrt = 29 kΩ (1%)	1440	1600	1760	kHz
Minimum pulse width			20		ns
RT/CLK high threshold				2	V
RT/CLK low threshold		0.8			V
RT/CLK falling edge to PH rising edge delay	Measure at 500 kHz with RT resistor in series		66		ns
Switching frequency range (RT mode set point and PLL mode)		200		1600	kHz
PH (PH PIN)
Minimum on-time	Measured at 90% to 90% of VIN, 25°C, I_PH = 2A		94	145	ns
Minimum off-time	BOOT-PH ≥ 3 V		0		ns
BOOT (BOOT PIN)
BOOT-PH UVLO			2.1	3	V
SLOW START AND TRACKING (SS/TR PIN)
SS charge current			2.3		μA
SS/TR to VSENSE matching	V_(SS/TR) = 0.4 V		20	60	mV
POWER GOOD (PWRGD PIN)
VSENSE threshold	VSENSE falling (Fault)		92		% Vref
VSENSE rising (Good)			94		% Vref
VSENSE rising (Fault)			106		% Vref
VSENSE falling (Good)			104		% Vref
Output high leakage	VSENSE = Vref, V_(PWRGD) = 5.5 V		30	100	nA
Output low	I_(PWRGD) = 2 mA			0.3	V
Minimum VIN for valid output	V_(PWRGD) < 0.5 V at 100 μA		0.6	1	V
Minimum SS/TR voltage for PWRGD				1.4	V

(1) Measured at pins.